[Closed] What do people think about..... 35mm diameter bars and stems?

In theory it should be a similar stiffness jump as 25.4 -> 31.8.

Whether it will become a std is anyone's guess.

are they claiming more stiffness or just the same stiffness for less weight?

I'm still waiting to find the problem with my super noodling and floppy 25.4 bars but weight saving I can understand...

Stiffer, stronger and lighter is the deal I think. That all sounds great but I'm running a Fox 36 up front and wondering if it might actually be a bit too stiff.

Deda been doing in on road bikes since last year. I doubt 31.8 stuff will suddenly dry up if thats what youre worried about, and I haven't been riding my 31.8 havens and worrying about them being too noodly...

If my MX bike is ok with 31.8 then i'm sure my MTB will be ok.

I think it's an excellent idea. How else will they sell people new stuff?

It makes perfect sense as bars width increases.

I don't think it will make the bars much/any stiffer than shorter 31.8mm bars but just help keep the stiffness and allow greater strength or less weight than using a 31.8mm centre for the given width.

35mm bars, could put them on 650b wheeled bike to be really niche

If my MX bike is ok with 31.8 then i'm sure my MTB will be ok.

The thing is, your mx bars are 3-4 the wall thickness of an mtb handlebar.

Meh..... I'll wait for 38mm.

TBH I'd prefer it if they worked their way up to it 33.6 as an intermediate size then on to 35 maybe..

Not sure if I like these sort of round numbers either...
metric parts? on bicycles? it'll never work!

I have 700mm 25.4 bars and they are plenty stiff enough. anything thicker is overkill IMO

stiff, light and strong..... Syntace.

as above my bars are 25.4mm, 740mm wide and stiff as a stiff thing according to the anal german magazine tests.

[url= http://tinyurl.com/ye9369h ]Don't question it. Don't say a word. Just key the music, and call the chorus girls, because we're on the edge—the razor's edge—and I feel like dancing.[/url]

TBH I'd prefer it if they worked their way up to it 33.6 as an intermediate size then on to 35 maybe

But surely it's better to sell you the 35mm bar now, then in 3 years time tell you it's too stiff and that the 33.6 is the ideal compromise?

FWIW I'm sure there were 22.2mm bars that were stiff enough, then 25.4 then 31.8, but (IMO) each felt better when you actually compared them.

Mine are great. But what do I know, I ride intenses and they are built on the piss according to the know it all muppets that live here. They are light, strong (I hope) and stiff and look pretty snazzy to boot.

Cookeaa, don't worry, I reckon they're 34.9 really.

so if these are bigger and lighter, presumably wall thickness is reduced and therefore more likely to be damaged in a crash.

Good point Onzadog.

1" (25.4), 1 1/4" (31.8), 1 3/8" (34.9)

I bet the only reason they missed out 1 1/8" for handlebars was so some fudd can't put the stem on the wrong way round. That would be ace, a 60mm stem with 5 deg offset to the right! 🙂

I bet the only reason they missed out 1 1/8" for handlebars was so some fudd can't put the stem on the wrong way round. That would be ace, a 60mm stem with 5 deg offset to the right!

My new favourite post, thank you you proper made me chuckle.

What do people think about..... 35mm diameter bars and stems?

i've thought about it, and i'm all 'meh'.

meh +1

I assume it's stiffer, until they sell you the carbon version which flexes to get rid of trail buzz!

I bet the only reason they missed out 1 1/8" for handlebars was so some fudd can't put the stem on the wrong way round. That would be ace, a 60mm stem with 5 deg offset to the right!

Nope I think Tioga actually had a crack at flogging just such a product...

Do you feel you want 800mm bars, rather than a 35mm stem? Surely that's the point.

[i]presumably wall thickness is reduced and therefore more likely to be damaged in a crash.[/i]

They say:
[img] [/img]

Also:
[i]By this point most performance [u][b]downhillers[/b][/u] understand the virtues of wide handlebars (increased stability, more control and less fatigue). But they often trade strength and stiffness for the increase in width.[/i]

Did you notice the 6th word in that paragraph. If you're one of those, get em. If not, what's the point?

Did you notice the 6th word in that paragraph. If you're one of those, get em. If not, what's the point?

So you never ride downhill, you get the chairlift down after climbing up?

Or is it possible that loads of people these days are happiest riding bikes a little to heavy/slack/bobby to go uphill at XC race pace, with the trade off they can ride down at near DHbike pace?

I know I do.

Would I buy them, yes, if Nukeproof (other budget bar brands are available) made a bar/stem and I was buying new then I would. Why not?

@v8 shin
nail=head.
how many times have we seen vertical bar ends pointing up, with vertical brake levers pointing down.

[quoteI bet the only reason they missed out 1 1/8" for handlebars was so some fudd can't put the stem on the wrong way round. That would be ace, a 60mm stem with 5 deg offset to the right!

Yea, but it would look awesome on a lefty!

[i]So you never ride downhill[/i]

Riding downhill doesn't make you a downhiller.

(A wannabe maybe, but I personally gave up on that idea in about 1995 😉 )

they'll be bringing out 9 speed cassettes next...

cookeaa - Member

[i]I bet the only reason they missed out 1 1/8" for handlebars was so some fudd can't put the stem on the wrong way round. That would be ace, a 60mm stem with 5 deg offset to the right![/i]

Nope I think Tioga actually had a crack at flogging just such a product...

Indeed they did. The "Cube" stem iirc. Somewhere in a box I have a Scott branded 1 1/8" handlebar too.

So that's five handlebar "standards" in how many years? 👿

Interesting; I have a DH bike it has 750mm wide, 15mm rise bars the clamp diameter is.... 25.4mm!
It has not exploded or killed me yet... I'm not really aware of Many others that have failed either...

All I would take from that headline is that the yield point for a 35mm dia [I]WonderBar[/I] is 21% higher than the next best performing (31.8 or 25.4?) Bar on a test obviously intended to exceed the products performance envelope... So what?

The thing is I don't really find I'm taking Bars made to "Old" standards past their yield point well... Ever... I doubt I'm getting that far into their elastic range TBH...

So why do I actually need a [I]"21% stronger"[/I] handlebar? it's not like the existing kit lacks a suffcient factor of safety for the task as it stands.

Is the suggestion that I'd basically need to be trying 21% harder to smash my own teeth out? I'll pass thanks...

What do people think about..... 35mm diameter bars and stems?

That in a few years they will be superceded by 37mm bars and stems, with similar claims of pure amazingness in comparison to the previous standard...

Meh..... I'll wait for 38mm.

Meh..... I'm waiting for 50mm...

why wait?? just get them drawn and CNC'd!

Surely the logical conclusion is some sort of spherical arrangement with cutouts that you hold onto? Probably be able to have plenty of choices of where to put your hands as well...