Tips on storing bik...
 

[Closed] Tips on storing bikes over a non-riding period?

Posts: 0
Free Member
Topic starter
 

Does anyone have any tips when laying up the bikes for a while if they're not going to be ridden, aside from a wash & lube of the chain and casettes?


 
Posted : 09/07/2010 4:10 pm
Posts: 41395
Free Member
 

"toss aside" works for me.


 
Posted : 09/07/2010 4:11 pm
Posts: 0
Free Member
 

are you going to jail?

what did you do?


 
Posted : 09/07/2010 4:11 pm
Posts: 0
Free Member
 

ask terry waite; he might have a good long term stratagy?


 
Posted : 09/07/2010 4:12 pm
Posts: 10498
Free Member
 

Put them in the loft so they don't get nicked


 
Posted : 09/07/2010 4:12 pm
Posts: 17771
Full Member
 

It's a bike not a hibernating animal..

Just put it in the garage/shed.


 
Posted : 09/07/2010 4:14 pm
Posts: 0
Free Member
 

erm...store them where they're usually stored. Works for me.


 
Posted : 09/07/2010 4:15 pm
Posts: 41395
Free Member
 

farmer giles - Member
ask terry waite; he might have a good long term stratagy?

What's rusty and sits behind the church?


 
Posted : 09/07/2010 4:16 pm
Posts: 0
Free Member
 

Shrink wrap in plastic and bury in the garden ๐Ÿ™‚ worked for Harold and Rose West ๐Ÿ™‚


 
Posted : 09/07/2010 4:18 pm
Posts: 251
Full Member
 

give it a clean and a lube, maybe take the seatpost out if it's steel.

I hang my bikes up by front wheel which keeps the forks seals lubed but I don;t think it's critical.

be prepared for any tyre sealant to have dried out when you get back to it.


 
Posted : 09/07/2010 4:18 pm
Posts: 0
Free Member
 

Get a big wooden chest, put it in there, bury it on island, make map.

[img] [/img]


 
Posted : 09/07/2010 4:21 pm
Posts: 0
Free Member
 

lol@realman

here be monstaaars


 
Posted : 09/07/2010 4:26 pm
Posts: 0
Free Member
 

find some sort of solid, vertical structure. if you have any walls about the house/garage etc., they are perfect for this. lean the bike against the vertical structure (wall). walk off.


 
Posted : 09/07/2010 4:38 pm
Posts: 49
Free Member
 

Replace air in tyres and shocks with nitrogen to prevent corrosion, wrap elastomerics (rubber items) in greaseproof paper to prevent degradation, ensure constant temperature and humidity, take the chain off to prevent rear shifter spring wearing and keep dark.

Or lean it against the wall in a safe place and return some time later. Just as effective!


 
Posted : 09/07/2010 4:43 pm
Posts: 71
Free Member
 

There may be some merit in leaving it in small/small to avoid stretching the mech spring, doubt it'd make any real world difference though.


 
Posted : 09/07/2010 4:45 pm
Posts: 0
Free Member
Topic starter
 

Might take the opportunity to have the Fox forks serviced and the Turner's sealed bearings looked at / replaced whilst things are quiet. Will clip-tie the brake levers too as this worked once before.


 
Posted : 09/07/2010 4:49 pm
Posts: 0
Free Member
 

Suspend it formaldehyde - Damien Hyrst style.


 
Posted : 09/07/2010 4:50 pm
Posts: 0
Free Member
 

What is this "non riding period" of which you speak? Is it when you are at work?

๐Ÿ˜‰


 
Posted : 09/07/2010 5:18 pm
Posts: 0
Free Member
 

Lightly salt then leave it hanging by a hook in a dark fairly cold place.


 
Posted : 09/07/2010 5:20 pm
Posts: 1
Free Member
 

Tupperware?

Or "Foreverware" if you were a fan of Eerie Indiana!


 
Posted : 09/07/2010 6:53 pm
Posts: 0
Free Member
 

depends how long is long, in our shop we get a load of bikes in that have sat for a year or more. Usually they have the same issues

tyres cracked due to being flat, and weight of bike on them
rear mech spring gone due to being at the top of the block when stored
front mech seized/cables seized usually only if bike was put awy with a winter of grit and crap still attached


 
Posted : 09/07/2010 7:09 pm
Posts: 0
Free Member
 

I'll look after them for you


 
Posted : 09/07/2010 7:52 pm
Posts: 1375
Full Member
 

I gave mine a good clean and stored them in a mates loft.

I'm away for two years...

Not in prison.

In Ethiopia.


 
Posted : 09/07/2010 7:53 pm