Sram shimano mech c...
 

[Closed] Sram shimano mech compatability

Posts: 813
Full Member
Topic starter
 

Hi Sram mech exploded climbing Dumyat today on Ebike is it still the case if I go to shimano on rear mech I have to change the shifter also. Bike is 12 speed if that makes any difference.
Cheers Mark


 
Posted : 18/07/2020 6:59 pm
 Neb
Posts: 543
Full Member
 

I'm using a SRAM 11s shifter with a Shimano 12s rear mech, it works fine. The clutch is better too!


 
Posted : 18/07/2020 8:46 pm
Posts: 813
Full Member
Topic starter
 

Maybe just get the mech then


 
Posted : 18/07/2020 10:10 pm
Posts: 21634
Full Member
 

I believe that with 12 speed stuff, it's all close enough that it's viewed by many as interchangable, but not optimised.


 
Posted : 18/07/2020 11:07 pm
Posts: 2320
Free Member
 

I junked my Sram GX rear mech last week.

Everything else is GX, shifter, Chain, cassette.

Fitted a new Deore 12 Speed, works flawlessly, better shifting than I ever remember with the GX.

It's lower profile than GX so should be out of the way of rocks, and hopefully less fussy about having a perfectly straight hanger.

Also at £38 is a helluva lot cheaper than GX.


 
Posted : 18/07/2020 11:12 pm
Posts: 2320
Free Member
 

Outer cable needs to be a few cm longer, but mine was too long anyway.


 
Posted : 18/07/2020 11:15 pm
Posts: 0
Free Member
 

Currently running a GX Shifter with an XT mech, SLX cassette and a GX chain, works beautifully.

Slowly evolving from SRAM to Shimano.


 
Posted : 18/07/2020 11:28 pm
Posts: 0
Free Member
 

Replaced a 12spd GX mech with XT. As above it works just fine, shifts more consistently actually.


 
Posted : 18/07/2020 11:41 pm
Posts: 813
Full Member
Topic starter
 

Perfect a shimano one it is then


 
Posted : 19/07/2020 9:56 am