Just wondered what you lot think of this. Finally finished with rp23 giving 4inches travel 12.5 inch bb and about 67-68 deg head angle. Forks at 5 inches. I also have betd linkage to offer 5.25 inches at rear with rp23 or 6 inches with coil shock and extend the forks to 6 inches for little trips abroad or when a little more travel needed. Weight comes in under 28.5lbs.
Thanks
Rich
[img] 
[/img]
So many odd bits .....
6" of travel and Arch rims, XX1 and chainguide, presumably that saddle isn't at riding height?
All that said/questioned those frames do rule 8)
Chain device will go when I get a clutch mech.
I only weigh 11.5 stone so the rims are fine but also have a set of 819s to swap when needed.
Saddle is at mid height.
Front end needs to lose some height.
I think you'll hate it. Sell me the frame cheap...
Just in process of rebuilding my sx as its still my fav bike of all time but hated it after I fiddled with the travel last time so going to be stock this time with old white 20mm pikes
Use arch on my enduro and they seem
To take all you could want for the weight of them
does the spade have a remote?
do you mean my half moon lawn edger??
it feels great with 4" for uk trails, light and lively feeling. Not tried the slightly longer travel option yet but seeing as we're going to molini or sierra nevada in october thought i'd give it a try as got a bargain on a betd travel linkage.
Was thinking about rims for italy trip with riviera bike and have some old but barely used EX721's can't decide if too overkill and to stick with the arches.