SPDs- but which one...
 

[Closed] SPDs- but which one? Done to death no doubt-sorry

12 Posts
11 Users
0 Reactions
51 Views
Posts: 0
Free Member
Topic starter
 

looking at setting up my kid with SPDS,
will be riding MTB, CX, ROAD and maybe a bit of track so which clipless pedal

Shimano MTB SPODS or something potentailly easier to clip in mud like an eggbeater?
Anyone any thoughts on what is best for kids (or does it not make much difference?)


 
Posted : 23/02/2011 11:49 pm
Posts: 0
Free Member
 

For that mix, I'd go with CB Candys. How old is your child though?


 
Posted : 24/02/2011 12:11 am
Posts: 0
Free Member
 

i wouldn't put children in spds.


 
Posted : 24/02/2011 12:15 am
Posts: 17
Free Member
 

So have CB got their bearing/bushing problem sorted out then?


 
Posted : 24/02/2011 12:16 am
Posts: 0
Free Member
 

I have eggbeaters and like the mechanism but they were really difficult to find when i started with them. Candy's might be better.


 
Posted : 24/02/2011 12:17 am
Posts: 0
Free Member
 

Candy 1s have a bushing and a cartridge bearing - 2 yr warranty
Candy 2s have a bushing and a cartridge bearing - [b]5 yr warranty[/b]
Candy 3s and 11s have a needle bearing and a cartridge bearing - again [b]5 yr warranty[/b]

That looks, to me, like a fairly firm commitment to quality with the new models, but as they've not been around that long, it's possibly too early to tell.


 
Posted : 24/02/2011 12:23 am
Posts: 0
Free Member
 

I would have said Shimano M520's, £20 posted including shimano cleats
Solid all round feel in retention and pedalling (less so as they wear) adjustabel tension. 380g isn't horrendous

I was looking through an old issue of mbr (I apologise .. ) and I came across an SPD pedal grouptest
Wellgo (very similar cleats) WAM19? (something with a 19 in the name) are 300g, which is lighter than even new XTR's
They were reportidly a touch flexy for mbr test riders*, I think I found them online for just over £20

*But if they're for your kids axle flex shouldn't be as bigger issue compared to journo's presumably doing the odd drop/jump or two?

There were also some Syncros 'AM' pedals with a bit of a cage (but very little) for about £40, but still as light as the previous generation xtr's

EDIT:
"something potentailly easier to clip in mud "
I'd reckon shoe choice can have a lot to do with it. Apart from compacted snow, I only have a problem with mud (with M520's) when I've been walking up a very muddy conditions, all it takes is a couple of kicks of cleat to pedal and they'll clip back in


 
Posted : 24/02/2011 12:25 am
Posts: 17
Free Member
 

Probably the Candys, cheap and easy to use. Fully serviceable


 
Posted : 24/02/2011 7:26 am
Posts: 0
Free Member
 

SPD stands for Shimano Pedaling Dynamics for a reason. Whilst not being very trendy, they do work really well for a long time. I've had my M737 for 13 years now and they have covered serious millage with only a small amount of play in the bearings. I don't know why people piss about with anything else.


 
Posted : 24/02/2011 10:46 am
Posts: 0
Free Member
 

Time every time


 
Posted : 24/02/2011 10:49 am
Posts: 0
Free Member
 

Shimano 520s - £20 work just as well as the more expensive ones and very little difference in weight. I have them on all my bikes except the road one and just can't see any point in spending more.


 
Posted : 24/02/2011 10:49 am
Posts: 0
Free Member
Topic starter
 

Cheers guys, really appreciated


 
Posted : 24/02/2011 10:51 am
Posts: 1026
Free Member
 

Personally I like Shimano M647, nice big platform.

[i] [/i]


 
Posted : 24/02/2011 10:55 am