Topic starter
I have taken the front brake off the forks but now it's replaced the pads are too close together and rub against the brake disc when I replace the wheel.
Can anyone tell me how I can adjust the brakes to get the wheel on and reset the positioning?
Cheers
Posted : 15/04/2009 4:33 pm
Stick a big screwdriver in between the pads, give it a wiggle to push the pistons back in.
Posted : 15/04/2009 4:35 pm
Best to push the pistons back in with the old pads in place then stick the new pads in.
Posted : 15/04/2009 4:39 pm
Topic starter
Sorted now, thanks.
I wrapped an old inner tube of the screwdriver first for padding and I think the pads are ok.
Posted : 15/04/2009 6:42 pm