Forum menu
Seatpost advice
 

[Closed] Seatpost advice

Posts: 443
Free Member
Topic starter
 
[#2681371]

I need a new seatpost after a less than great purchase that didn't do what a seatpost should do, hold the saddle in one position!
I would go with a thomson, as they are super reliable, apart from due to my leg length(dimensions) I like/need my saddle fairly far back, and thomson posts rubs annoyingly against the saddle. So something with a bit more layback (20mm+) so I can clamp the saddle more in the middle of the rails. I guess probably looking something high end-ish but not ritchey super logic prices!
Thanks in advance.


 
Posted : 21/04/2011 10:32 am
Posts: 9
Free Member
 

Thomson layback post??


 
Posted : 21/04/2011 10:36 am
Posts: 443
Free Member
Topic starter
 

No sorry wasn't clear the layback version,which only has 16mm, and that was what I was referring too.
Thanks anyway


 
Posted : 21/04/2011 10:40 am
Posts: 0
Free Member
 

Not exactly high end, but Ragley spikes seem pretty good, 25mm layback. Not broken one so far...


 
Posted : 21/04/2011 11:12 am
Posts: 0
Free Member
 

Had exactly the same issue

I swapped to an FSA with 20mm layback but the single bolt creaked so then found a double bolt Control Tech from crc with I think 22 mm payback which works perfectly


 
Posted : 21/04/2011 11:34 am
Posts: 0
Free Member
 

i would STRONGLY ADVISE against a control tech. the first one i got came loose every single ride, so i got it replaced under warranty, and this one came loose today. i tightened it up and the threads stripped. awful awful awful.


 
Posted : 24/04/2011 1:29 pm
Posts: 0
Free Member
 

Gravity Dropper ๐Ÿ˜€


 
Posted : 24/04/2011 1:37 pm
Posts: 66111
Full Member
 

Pro's Koryak is good- solid and not expensive, not too heavy. Anodising isn't great, it scratches a bit easier than some but it's a good solid allround bit of kit


 
Posted : 24/04/2011 1:38 pm
Posts: 0
Free Member
 

Thomson and change your saddle to one with higher rails? I had similar issues witha thomson and flite saddles. changed to a specialized saddle, and problem solved! Maybe an i beam set up would be best?


 
Posted : 24/04/2011 1:39 pm
Posts: 3351
Free Member
 

I Beam post and saddle here, should have you a chunk of weight and is plenty strong too.


 
Posted : 24/04/2011 1:44 pm
Posts: 0
Free Member
 

+1 for the Ragley post. Though at prsent there's not many size options.


 
Posted : 24/04/2011 1:47 pm
 GW
Posts: 0
Free Member
 

ibeam's aren't strong (especially if you run the saddle far back).


 
Posted : 24/04/2011 1:59 pm
Posts: 0
Free Member
 

Got a Crank Bros on my Nicolai, anodising not up to much but not flexy at all whilst doing Snowdon last weekend
[url= http://www.chainreactioncycles.com/Models.aspx?ModelID=53279 ]Posty thing [/url]


 
Posted : 24/04/2011 2:22 pm
Posts: 34530
Full Member
 

i beam? means a new saddle but loads of layback

crc had a layback version for a tenner in their vip sale i think its 20 quid again now though


 
Posted : 24/04/2011 4:11 pm