RoRo / Ra Ra 2.25&q...
 

[Closed] RoRo / Ra Ra 2.25" Evo Snakeskin 29er tyres - any better combos for the money?

Posts: 966
Free Member
Topic starter
 

about £65 delivered from Biksdiscount @ the mo.

want something very light, very fast and with an element of durability (hence snakeskin) for my 29er weight-weenie hardtail build.

i was going to go with the Michelin Wild Race'R 2.25/2.1 combo from On One (£26 the pair!!), but they are not fantastically light.

they will be run tubeless on pacenti rims.

cheers


 
Posted : 17/02/2014 1:10 pm
Posts: 403
Free Member
 

Don't think you can better the schwalbes for your requirements imo


 
Posted : 17/02/2014 1:54 pm
Posts: 71
Free Member
 

Thunder Burt?


 
Posted : 17/02/2014 2:02 pm
 DanW
Posts: 1062
Free Member
 

If you want light and fast then do Snakeskin sidewalls really help that much? Standard Ralphs will take a fair bit of sidewall scuffing in rocky terrain before they fail and you are just as susceptible to punctures around the tread (most likely cause of tyre failure during a ride or race) as any other version. I guess it depends on a lot of factors but Ralph front, Burt rear seems like a decent all round, fast, dry option


 
Posted : 17/02/2014 2:18 pm
Posts: 966
Free Member
Topic starter
 

i think thunder burts will be taking it one step too far.

i do want a bit of a capability of crappy conditions.

i think the snakeskin variant is a good compromise... the combined uplift in weight is about 180g. if i am less susceptible to blow outs or tears, then that is worth it imho.


 
Posted : 17/02/2014 2:25 pm
Posts: 71
Free Member
 

Not [i]that [/i]weight weenie then is it 😉

For all round I'd just use Rons F&R, and personally wouldn't (haven't) bother with Snakeskin. If you ride somewhere rocky it's probably worth doing though.


 
Posted : 17/02/2014 2:34 pm
Posts: 966
Free Member
Topic starter
 

okay... so i'll backtrack on my previous comment.

i've been reading up on thunder burts and they seem like the no-brainer tyre for me, so i will be putting one on the back for sure. i will go for snakeskin rather than TL or Raceguard as i want the strenghtened sidewalls.

i would also go for the same on the front BUT what i haven't mentioned yet is that the build will have carbon rigid forks on the front and the Burt only comes in a 2.1" at the moment. i'm pretty sure i should be having a 2.25" up front at the very least. this pushes me back towards either a RaRa or RoRo... possibly the RoRo snakeskin as it's lighter than the RaRa.

thoughts?


 
Posted : 17/02/2014 6:24 pm