[Closed] Rockshox Reverb seatpost

Mines due in next 3 weeks..

stupidly i ordered one on the CRC website a couple of weeks ago along with 2011 revelation fork - due date was yesterday..

now they are listed out of stock with no eta :/ and my order is in limbo (processing) with the fork in stock and the seatpost out of stock.... argghh!

Orange, you could nail there sales dept & ask them to split the order

Does he have to nail everyone in the sales dept or just the fittest one? 🙂

Depends on his preferences... (bloody iPhone keyboard/spell checker) 😉

Reverbs listed as being available between 17/12 and 10/12 and TBC depending on size.
Revelations again 20/09 Dual position air
29/10 Dual air.

I have some samples on order and was told "November"

That's from the Fisher site, I'm guessing yours will be a bit earlier being a manufacturer though Brant? You recovered from Eurobike?

bstards I orderd from CRC with a 6 sept due date and now no due date just processing

are they on sale in the USA as have a mate going out there

Is CRC stuff O.E though? Therefore when said manufacturer they get their stuff off gets them in the states they should have them, same would go for Brant as he's part of the Hotlines cartel??

I am kind of down the pecking order in terms of delivery. Being a little OE (I think I ordered them on my Vitus account). I wouldn't consider it unfair if Fishers got them earlier 🙂

LoCo - Eurobike recovery? Yeah - I escaped at lunchtime on Friday and was home by about 8pm via Catamaran, Train, Plane and Van. A good show, made easier by my "over 40" plan of minimal beer, lots of food, nearly enough sleep.

We made a vid about it here.

order has been split now, but December delivery for the Reverb WTF!

can the fittest one in sales be female please?

Horsebollocks! They don't do a 30mm one?!

30.9 and 31.6 mm at the moment, I'm taking pre orders, alternativly I may have something a bit different in the near future 😉

Si: do tell!

I guess I could ream out the seat tube by 0.9mm 😛

Looks one of the best this, I was hoping early adopters would have tried it for me by xmas though 🙄
For £250 I'm sure I can handle stopping now and then to adjust saddle in the meantime.
Like the spiral markings on your new post Brant.

Garylake, I'm not saying anything until all details are confirmed and testing is done, I've got a few suspension related goodies in development as we speak, I'm currently covered in swarf and cutting fluid 😮

Its not out in the States yet.

im looking at getting one maybe

I'm tempted but I must resist... I shoud never buy a Mk1 of anything... it always ends in warranty 😯

brant how is your seatpost going? did you start designing/making one?

really would like to order one...but...
I learned it ..messiah is right !

I've just seen on and pressed the button and pushed the seat down and everfing! It was smooth and didn't come up too quick so it smacked you in the nads, in fact if anything it was a little slow so I'm guessing you can adjust the speed of up and down. It was very understated in black and silver, not at all blingy like a Joplin.

This generation of these type of posts is gonna be interesting with Fusion doing one too.

I'm guessing you can adjust the speed of up and down.

I think I heard that too.

brant how is your seatpost going? did you start designing/making one?

I asked a company that's very good at making things like that if they could make us one. Hydraulic control and stuff isn't really my forte. But we set the specs for weight, drop, seals, etc... It's coming along well and we should see something soon.

Brant - ask them to copy the design of a cannondale lefty rather than just a couple of slots to (not) keep the saddle from wobbling around?

Echoing what GW said, I binned a USE suspension post as I coudl not stand the play in it.

Lefty slots or whatever to stop ANY play would be very important for me.

Same here.
Even the play in my normal seatpost is too much for me.

This has been taken into consideration, news to follow hopefully fairly soon 😉

I always thought someone would use the Lefty as an idea for adjustable seatpost. Needle bearing and a square shaft.

I wonder if a polygon interface would work for one of these...probably too much friction though

Loco - Oooohhhh!! do tell?

One in development at the moment, will give more details when it's a little further down the line.

ooOOoo - Member

I wonder if a polygon interface would work for one of these...probably too much friction though

Isn't that what the sette ryde cheapy has?

[img] ?v=0[/img]

Could'nt you use the staft from a swivel chair to make one?

Retro- yes that is a polygon 🙂 but I meant more like this, it's what they use for certain axles etc.
[img] [/img]

Echo the wibbly wobbly comments.

Brant - can you tell us if yours is likely to be available in 27.2 or will it just be the larger sizes?

Oh yes, I need 27.2 aswell.

now listed on CRC as in stock on the 25th Oct

Only 2 weeks to wait now
do they really exist

Interesting info on them here:

http://forums.mtbr.com/showthread.php?t=656704

Just picked mine up.

Hopefully try it out tomorrow night or defo the weekend

[url= http://farm5.static.flickr.com/4054/5081626321_212fd6a4b2_z.jp g" target="_blank">http://farm5.static.flickr.com/4054/5081626321_212fd6a4b2_z.jp g"/> [/img][/url]
[url= http://www.flickr.com/photos/jamesfergson/5081626321/ ]Reverb[/url] by [url= http://www.flickr.com/people/jamesfergson/ ]james_ferguson[/url], on Flickr

[url= http://farm5.static.flickr.com/4027/5081628629_2ba0558184_z.jp g" target="_blank">http://farm5.static.flickr.com/4027/5081628629_2ba0558184_z.jp g"/> [/img][/url]
[url= http://www.flickr.com/photos/jamesfergson/5081628629/ ]Reverb[/url] by [url= http://www.flickr.com/people/jamesfergson/ ]james_ferguson[/url], on Flickr

[url= http://www.flickr.com/photos/jamesfergson/5081624019/ ]Video[/url]