Rebuilding a wheel ...
 

[Closed] Rebuilding a wheel from crest to arch, couple of questions.

Posts: 2053
Free Member
Topic starter
 

Got a couple of nice dents in my rear crest rim, was thinking of rebuilding it with an arch rim but...

1. Is the arch stronger with regards to rim impacts? The damage to the crest looks like its from hitting stuff square on, the arch is the same design but has an internal brace for strength, will this help with strength around the lip?

2. Will I need new spokes? the dimensions of the two rims are the same...

Anything else I need to consider?


 
Posted : 09/05/2014 8:08 am
Posts: 0
Full Member
 

I would use new spokes.

If you hit an Arch rim hard enough it will dent.

You should also consider:
- pumping your tyre harder
- improving your skills


 
Posted : 09/05/2014 9:21 am
Posts: 41395
Free Member
 

Re using spokes is fine if they are the same length or close.


 
Posted : 09/05/2014 9:30 am
Posts: 119
Free Member
 

I have often reused spokes but never the nipples and yet to have a problem
As long as the length is ok of cource


 
Posted : 09/05/2014 9:58 am
Posts: 3394
Full Member
 

Re use spokes, its a old chesnut.

But, if you've not had issues with spokes failing (not beening broken by other stuff) then they should be fine.


 
Posted : 09/05/2014 10:05 am