race face cinch cra...
 

[Closed] race face cinch crankset question??

11 Posts
5 Users
0 Reactions
55 Views
 ton
Posts: 24220
Full Member
Topic starter
 

will one of these enable me to run a 22/32 4 bolt combo?

http://www.chainreactioncycles.com/race-face-cinch-direct-mount-crankset-spider/rp-prod113259

or should I just buy a shimano complete unit


 
Posted : 18/09/2017 12:28 pm
 ton
Posts: 24220
Full Member
Topic starter
 

come on people
please dont fail me.


 
Posted : 18/09/2017 6:01 pm
Posts: 0
Free Member
 

Yes.. That will do want you want as long as you have next sl cranks


 
Posted : 18/09/2017 6:02 pm
Posts: 3790
Full Member
 

Yes, but Shimano cranks will end up being a similar cost if you don't have the rings, and are better cranks anyway.
RF are specced on bikes as they're cheaper than Shimano, not because they're better.
With the cinch adaptor, you have multiple interfaces that could work loose/creak, and you lose the sole selling point of Cinch - the cleaner look of a DM single ring.


 
Posted : 18/09/2017 6:06 pm
Posts: 3790
Full Member
 

I'd sell the Next SLs before they fail and put on some HTII cranks.


 
Posted : 18/09/2017 6:07 pm
 ton
Posts: 24220
Full Member
Topic starter
 

shimano ordered then

cheers all


 
Posted : 18/09/2017 6:10 pm
Posts: 834
Free Member
 

If it's not too late I'm happy to send you the spider and rings that come with my race face aeffect cranks. Unused cos I went single ring immediately.
They were on my YT jeffsy al2.


 
Posted : 18/09/2017 6:13 pm
 ton
Posts: 24220
Full Member
Topic starter
 

mintyjom, what size rings?


 
Posted : 18/09/2017 6:20 pm
Posts: 834
Free Member
 

24 / 36 according to their website..bit bigger than you want I know.


 
Posted : 18/09/2017 7:35 pm
 ton
Posts: 24220
Full Member
Topic starter
 

gone for a shimano one noe, thanks for the offer.


 
Posted : 18/09/2017 7:58 pm
 DezB
Posts: 54367
Free Member
 

Thank link is the same spider that was on my Turbines when 2x
Shimano is the sensible option though.


 
Posted : 18/09/2017 9:42 pm
Posts: 834
Free Member
 

No problem.


 
Posted : 19/09/2017 7:44 am