Quick response need...
 

[Closed] Quick response needed what PSI for 2.2 mountian kings

7 Posts
6 Users
0 Reactions
48 Views
Posts: 0
Free Member
Topic starter
 

advice needed on what psi i should be running my tyres at. For genral xc use. I think its 45psi is that correct?

cheers


 
Posted : 22/03/2010 1:25 pm
Posts: 0
Free Member
 

Whatever feels right for what you do


 
Posted : 22/03/2010 1:28 pm
Posts: 0
Free Member
 

There is a school of thought that suggests contis need higher pressures to work than other tyres. 45 sounds a bit high but it depends on a lot of factors including your weight.

FWiW I run mine at 40 rear and 35 front or thereabouts


 
Posted : 22/03/2010 1:30 pm
Posts: 0
Free Member
Topic starter
 

thanks. tandem ill give that a go


 
Posted : 22/03/2010 1:33 pm
Posts: 0
Free Member
 

Conti say 50 but 45 works well for me


 
Posted : 22/03/2010 1:42 pm
Posts: 0
Free Member
Topic starter
 

thanks surfr


 
Posted : 22/03/2010 1:42 pm
Posts: 71
Free Member
 

I ran 2.1" Speed King Supersonics at 30!


 
Posted : 22/03/2010 1:43 pm
Posts: 0
Free Member
 

I go a lot lower than that - maybe 30 on the front (never actually measure), but if it were rocky around here I would be getting punctures because they are quite flimsy tyres. To be honest the novelty has worn off now (very low weight, fast rolling) and I'll be going back to a more chunky all-rounder that I can run soft more reliably.


 
Posted : 22/03/2010 1:45 pm