Topic starter
What is the spacer setup for the bb cups on the Inbred. I think its a 68mm bb shell. Dont want to suffer chainsuck etc if i can help it.
Ta for help
Posted : 09/06/2016 4:19 pm
Standard setup is two on the drive side, one on the other. Not sure about the non-chainsucky setup.
Posted : 09/06/2016 4:34 pm
Inbreds vary as I found out - 73mm with a ISCG mount, 68mm without - measure it if you can.
Edit - as per instructions with BB, 2.5mm on nds, 5mm of spacers on drive side. Not all the spacers are same size.
Posted : 09/06/2016 4:38 pm