Forum menu
on one bootzipper a...
 

on one bootzipper aye or nay

Posts: 1182
Free Member
Topic starter
 

i have loads of bikes but dont have a fully rigid.
this looks like a fun bike and not too fancy.

any real world experience or thoughts?


 
Posted : 06/09/2023 9:01 pm
Posts: 3060
Full Member
 

I had one for a short while, as a stopgap before getting a custom Ti frame made.

IT's a great bike, I'd recommend it especially if you can pick one up cheap.


 
Posted : 06/09/2023 9:05 pm
Posts: 3064
Free Member
 

I had one

It was heavy

It was uncomfortable

It was shit


 
Posted : 06/09/2023 9:06 pm
Posts: 1851
Free Member
 

I've a pal who has one.  He's delighted with it, uses it loads for getting around on, bikepacking and local trail bimbling.


 
Posted : 06/09/2023 9:10 pm
Posts: 1182
Free Member
Topic starter
 

so, mixed reviews so far.
i have eyes on a cheap one, original spec for 375.


 
Posted : 06/09/2023 9:12 pm
Posts: 2139
Free Member
 

At that price give it a go and punt it on if you don’t gel

Love a rigid bike!


 
Posted : 06/09/2023 10:35 pm
Posts: 2425
Free Member
 

I have one - currently rigid ss. Only keep it as don’t mind locking it up in a bike rack. Not the world’s best bike imo. Heavy for what it is. Not that much fun to ride but at least no one has stolen it.


 
Posted : 06/09/2023 10:53 pm
Posts: 6332
Free Member
 

I have one and love it. Sure, it's heavy but it's a cheap, steel mtb - what do you expect?

I commute and tour on mine (done Venice-Prague and the Torino-Nice rally route). Supple, good geo, adaptable.

It's not perfect:

- the stock fork is REALLY heavy, so I've swapped that for an Exotic carbon. Even for touring it's too heavy IMO.

- the stock kit is heavy and basic (brakes, cranks, bars etc.) so that all came off and some lighter/better stuff put on

- wheels swapped out for DT X1900

- headtube is a bit short, so you have to run a fair few spacers to get the bars up high enough

- likewise, you need a decent length seatpost (Thomson 410mm)

But the ride is good; stiffer than a light steel frame yet supple enough to be comfortable. The Torino-Nice is partly offroad so you spend a lot of time on rocky tracks (with panniers) and the ride was perfect. If you want a tough, basic 29er for light trails/commuting/touring then it's ideal. If you want a light trail bike then you need to look elsewhere and spend more money.


 
Posted : 07/09/2023 11:04 am
Posts: 86
Full Member
 

I have, it's great, as above swapped the stock fork for a carbon. Geo is good and I don't find it overly heavy, tubing is butted and it has the steel frame compliance. Frame is nicely made. Simple work horse bike for touring, commuting, winter rides etc.


 
Posted : 07/09/2023 12:01 pm
Posts: 2320
Free Member
 

Get something with decent geometry instead

Like a Stooge

Then at least it will be fun and capable to ride off-road rather than just a bit dull


 
Posted : 07/09/2023 8:42 pm
Posts: 3783
Free Member
 

Get something with decent geometry instead

And

the stock fork is REALLY heavy, so I’ve swapped that for an Exotic carbon. Even for touring it’s too heavy IMO.

Just buy an on one scandal instead, sell the suspension fork and buy a carbon fork. Best of both worlds


 
Posted : 07/09/2023 10:34 pm
Posts: 492
Free Member
 

Why a scandal and not the huntsman (£899 woth gx, codes ans r35s) and swap to rigid? Would be a better swap imo


 
Posted : 07/09/2023 11:03 pm
Posts: 4383
Full Member
 

How about an On One Whippet instead? A lot lighter, and can probably find a used one for a good price.


 
Posted : 08/09/2023 10:14 am
Posts: 6796
Full Member
 

I was going to mention a rigid Whippet, as long as you avoid the SX version. Imagine it wouldn't cost much more considering the second hand market and the fact they were not expensive new?


 
Posted : 08/09/2023 11:52 am