Topic starter
I haveTreat myself to a new pair of V8's grease port pedals,( have had a pair for years and static pins are worn right down p.s not grease ported)is it worth giving them a bit of grease in bearings to start them off, or just leave them and grease when and if needed.
Posted : 23/06/2012 5:58 pm
I found there was very little grease in mine from new so i used the syringe to pump a load more in from new. Then pumped a bit more in every time they sounded a bit dry or rattly
Posted : 23/06/2012 6:16 pm
Topic starter
Cheers , will grease them up.
Posted : 23/06/2012 7:20 pm