[Closed] New steed - 2010 Ibis mojo SL (wanting build advice though!)

well i dont see tyres, tubes, chain, grips so that might add a bit.

sounds nice though, enjoy! (and id try a shorter stem if it were me)

Saint on that? Surely it's crying out for a lighter groupset?

DX m647 pedals weigh a bit too.

very similar build to mine, picking the frame up on sunday, cant wait... have to agree with atlaz tho:

Saint on that? Surely it's crying out for a lighter groupset?

I agree with atlaz a lighter group set would be more suited.

think you will find ibis reco max 160 rear rotor, i run a single pot rear brake and a 4pot at the front more than enough, as you have choosen the sl you realy need to give it as many lite parts as possible, mine has a nice dt swiss 150 fork up front with 2009 crossmax slr wheelset full xtr drive/gears and hope to stop it oh and a joplin post. stem and bars need sorting when i bring it out again in the spring

Saint on that? Surely it's crying out for a lighter groupset?

eh? He's only got saint shifers & rear mech? How much weight would XT really save? Maybe a few grams on the mech, but I doubt much at all on the shifters...

My mate has one built with full XTR, carbon DT forks, Carbon finishing kit, Juicy Ultimates in 203mm front & back and stans summit on american classic hubs.

Weighs in at under 24lbs, Stiff built it up so they put the brakes on it, surely if it's only meant to have a 160mm rear they would've said that?

The weight above does not include chain (I need to buy one)but does include the tyres, tubes, cassete etc

Most of the parts come off the Five hence the saint stuff. Its all 2009 and has the blingy gold bits which I like (the shifters are actually lighter than some XT I had lying about & dont have windows, which i prefer) - I was going to buy a XTR chainset, rear mech & shifters when I bought the frame yesterday but i wimped out.

Im not going for a super light build (more AM) hence keeping the pedals, I only quoted the weight as I was so suprised.

Steed 😐

A Joplin works (when it's working) really well with the Mojo.

+1 Sharkbait

You might wanna drill a hole in the BB shell as well. Mine normally soaks up water like a sponge in the winter...hasn't been ridden since October though...

Doesn't sound like any type of horse I know of ❓

+2 sharkbait 😳

+3
Could be worse could be a "rig".

Doesnt a Saint mech need a Saint hub ?
(Mech mounted on axle or am I totally bereft of any usefullnesssness).

Doesnt a Saint mech need a Saint hub ?

Nope, its a standard fitting.

Sounds like a good build im on a large as well currently with a 90mm stem going to drop to 70mm.

Great bike enjoy it !

[img] [/img]

Build
XTR group set
DT 240 hubs to DT 4.2 rims rear 10mm front 15mm QR
Fox Float 140 FIT
Easton EC90 seat post
Thomson stem
Raceface Next SL bars
Ti spoon
Hope Tech4 front Hope tech 2 rear floaty rotors
XTR 959 pedals

That's a nice looking rigsteed you have there shredder.

shredder,

How tall are you perchance?

I think ill have probs with the standard QR (coming from a maxle rear end) - should i upgrade to 10MM axle? (i think my ex1750 have the same hubs as yours) - if so, what do i need?

Also - what size rotor are you running on the rear?

Ta much she is indeed a good rigsteed the old girl 😉

Is there anything out of the ordinary that I should consider when building it up?

Don't call it a 'steed' and you'll be fine.

shredder; my fave looking bike is the Mojo. My fave colour for a bike is white.

You sir are a git 🙂 8)

(I actually like my white labrador-dragging-its-arse Mk 1 Nomad almost as much but it lacks white forks..)

Hi Oxnop im 6ft tall bang on. Thats just what I did upgraded the hub to a 10mm using this;

http://www.chainreactioncycles.com/Models.aspx?ModelID=23978

with this

http://www.chainreactioncycles.com/Models.aspx?ModelID=21670

or better still this
http://www.balleracing.com/Hadley/Hadley10mmAxle.htm
Which I have fitted to my other bike a Orange 5 I payed for it with Paypal and it came in around a week email Eric. Really quality bit of kit and better than the DT one in the link above, which I also have fitted to the Mojo.

I have 183 front 160 rear and as I say I run a Tech M4 caliper front with a Tech X2 caliper at the rear. No problems stopping at all superb brakes the latest Hopes.

Cheers

it'll weigh more, they always do

And as mentioned previously, any claim of weight must be backed up by a photo of said bike on scales showing said weight.

And none of this without pedals crap.

[img] [/img]

Hers mine weighing in at 27.2 lbs, but I guess the GD has something to do with that, but wouldn't take it off :o).

My standard Mojo is a large. I am 5.11 running a 70mm.
Great bikes. New Rev suits much better than 2009.
Running Elixer 160 out back. 185 front.
Full SRAM X0

Did and ejoyed Transwales on it. Also rode some tastey trails with Dales Bike centre.
I like running a very low front end on it. Big but light tires.
Worth Heli taping key areas. Also use chainstay protector on seat stay.
Take your time cutting cables. They can rub your legs when cycling. I would obviously also recomend Gore Ride On Cables for stress free riding

It looks like a really nice build! I agree with others about the saint stuff being overkill... You shouldn't need a 10mm kit though, as the ex1750 come with a 10mm rws system as standard...

Cheers for all advice- realised the front mech I had would not work, so I'm off to get one as soon as the LBS opens.

Can't wait to get out it for a proper ride.

SAFK's- my wheels came with the 12mm and qr adapters & no RWS.

hi everyone
this is my superlight and i love it and it comes in 27lb inc joplin
dt swiss 150s
dt swiss rims on industry nine hubs
truvativ noir carbon crankset and riser bar
sram 0 carbon shifters and rear mech
hope m4s
just waiting for bushings to swap rp23 boost for dt swiss xr carbon to get it under 27lbs 🙂

[IMG] [/IMG]