Need a new HT2 BB
 

[Closed] Need a new HT2 BB

Posts: 8469
Full Member
Topic starter
 

Other than a bog standard Shimano, or a Hope (got one already) is anything else worth considering?


 
Posted : 01/05/2016 6:48 pm
Posts: 43888
Full Member
 

Gusset


 
Posted : 01/05/2016 6:49 pm
Posts: 3384
Free Member
 

/s****....


 
Posted : 01/05/2016 7:18 pm
Posts: 0
Free Member
 

Depends how much you want to spend. I'd say the best money can buy is [url= http://www.chainreactioncycles.com/ceramicspeed-ceramic-bottom-bracket/rp-prod143290?utm_source=customerops&utm_medium=techsupport&utm_campaign=CRC012 ]Ceramic Speed[/url] but obviously comes at a premium.


 
Posted : 01/05/2016 7:46 pm
Posts: 2155
Full Member
 

I've tried a couple of the 'bit more than a shimano but not really expensive' ones and honestly been pretty disappointed on overall life so far (one died- really seized- in about three rides). Being able to replace the bearings is nice, feels less wasteful, and I'll give them a little bit longer, but in future I may just go back to shimano.

Or some wheels manufacturing ones. Maybe.


 
Posted : 01/05/2016 11:50 pm
Posts: 1083
Full Member
 

[s]Don't bother with the[/s] I had an Uberbike one, the bearings were utter crap, they were more grindy than a grindy thing after three rides. Uberbike weren't really interested either, just told me to open up the bearings, wash them and put more grease in. I did that and they were still shit. XT for £13, job done.


 
Posted : 01/05/2016 11:54 pm
Posts: 0
Free Member
 

Gusset and XTR on my bikes. Seem to be lasting longer than XT and Deore.


 
Posted : 02/05/2016 12:34 am
Posts: 0
Free Member
 

Phil Wood, if you don't want King.

You just need to find somewhere with stock...


 
Posted : 02/05/2016 8:39 am
Posts: 5152
Full Member
 

Shimano, if the bearings go, post them to BETD and they will put in very good bearings in - they did this to a raceface of mine that has since lasted about 3 years


 
Posted : 02/05/2016 8:42 am
Posts: 0
Free Member
 

Gave up with my Hope ... bearings too expensive, you can get a Saint BB80 for £19 and fit it hassle free in minutes, chuck it out after a year!


 
Posted : 03/05/2016 1:54 pm
Posts: 6480
Free Member
 

M8000 xt have changed quite a bit, time will tell if the sealing is better or worse. Hope steel and new posher raceface no better than cheap shimano IME.


 
Posted : 03/05/2016 1:59 pm
Posts: 66084
Full Member
 

Gusset is good on day 1 but also easily servicable and uses normal bearings, win. Just don't break the plastic top hat (too much; you can break it quite a lot and it still works). Can't see past them myself.

Don't get the ceramic one, there's no benefit whatsoever, it costs more, and it doesn't last as long.


 
Posted : 03/05/2016 3:36 pm
Posts: 0
Full Member
 

Hope are just fantastic if you install them correctly, don't waste your time looking elswhere.


 
Posted : 03/05/2016 3:45 pm