Maxxis Crossmark on...
 

Maxxis Crossmark on 29mm rim?

Posts: 4378
Full Member
Topic starter
 

Doing a fair amount of road miles recently and want to change the 2.35 Forekasters to something faster and more suitable. I have a spare Rekon Race and Ikon, but wondering if a Crosmark or similar in 2.1 would work well on a 29mm (internal) rim. Or even something like the Rambler in 700c x 50.


 
Posted : 10/06/2023 3:20 pm
Posts: 9251
Full Member
 

I picked up an older Hope enduro rimmed wheel a bit back and on the bike radar review it is 23mmmm internal(28mm) and they were happy to put on a 2.35/2.4" tyre.


 
Posted : 10/06/2023 3:32 pm
Posts: 4378
Full Member
Topic starter
 

I'm asking the opposite. Narrow tyre on a 29mm rim.


 
Posted : 10/06/2023 3:39 pm
Posts: 1679
Free Member
 

Really depends on the specific tyre

Some gravel tyres will def be fine on a rim that wide. I've ran Hutchinson Tundra's and Maxxis Refuse (both ~50mm) on 29mm rims and they were fine

On the other hand, Maxxis Minion semi-slicks are pretty square even on a 25mm rim

So, I'm not sure about the Crossmark, but I suspect the 50mm Rambler may be OK if you go with the tougher Silkshield


 
Posted : 10/06/2023 4:21 pm
Posts: 9951
Full Member
 

This article might help. They say 2.25 inch is best in 29mm. Do you can’t be far off

https://bikepacking.com/gear/wide-gravel-wheels

This might help too

https://www.wtb.com/pages/tire-rim-fit-chart


 
Posted : 10/06/2023 6:48 pm