[Closed] Inbred - Front Mech Slide-in Cable Boss Thingy

One of [url= http://www.ebay.co.uk/itm/Bike-gear-cable-under-bottom-bracket-cable-guide-/180699104302 ]these?[/url]

do you have another you could do a pic of?

One of these?

Nope, its a small boss that slides into another boss on the frame, above the front mech. It mounts the front mech cable.

One of these?

http://www.chainreactioncycles.com/Models.aspx?ModelID=29462

PaulD

A Cable Stop. It fits into the last cable guide above the front mech.

A Cable Stop. It fits into the last cable guide above the front mech.

Thats the badger. Searched on the on-one site with that and still can't find one :s

I have one - on an Inbred as it happens (hence I recognised what you were after).

I thought as much, thanks. All we need now is another one!

[img] [/img]
http://www.chainreactioncycles.com/Models.aspx?ModelID=12004

No longer available at CRC, but might help you find what you are after.

Looks like you will ned to buy the 4-pack I linked to earlier.

The Shimano ones do have a brass insert and a rubber seal, so with the noodle and rubber boot do an excellent job.
You can cut the noodle off for the ends at the shifter and rear mech.
I use SP41 outers, preferably full-length.

PaulD

Paul - how do those Shimano ones work?

Looks like you will ned to buy the 4-pack I linked to earlier.

The Shimano ones do have a brass insert and a rubber seal, so with the noodle and rubber boot do an excellent job.
You can cut the noodle off for the ends at the shifter and rear mech.
I use SP41 outers, preferably full-length.

PaulD

Hi Paul, aren't these purely for sealing the cables?

Yes, these are cable-end sealed ferrules, recommended for SP41 outer.

You can keep or cut off the noodle and rubber boot as appropriate.

This link shows the sealed ferrule (without noodle and boot).

The 4-pack is Item 5 on this page...

I thought the split cable-stop was welded onto the frame.

The metal device in the picture is just an (overweight) alternative to mine.

PaulD