its all very confusing
easton havoc dh bars
they say see stem manufacturer; raceface 2 bolt prodigy no joy on interweb
sram rocket shifters
hope mono levers
odi ruffians
can find no info on any
best i can see is about 5-6nm for stems
cheers
best i can see is about 5-6nm for stems
They all seem to be that
edit sram appears to be 2.5-4nM for shifters
Just do it until they stop slipping ?
After ruining an £80 pair of carbon bars through overtightening brake lever clamps, I spent a further £50 on a torque wrench only to find that I could achieve similar torque if I held an L shaped hex key by the short end and tightened the bolt by inserting the long end. It's very difficult to overtighten bolts this way.
This top tip was brought to you at my great expense 👿
Kimbers where did you find the carbon Havocs? I can't find anyone selling them in the UK yet 🙁
sorry jenson usa!
and they were monkeylight dh
http://www.jensonusa.com/store/product/HB402A01-Easton+Monkeylite+Dh+Riser+Bar.aspx
got taxed as well so only saved a fiver over crc price in the end 😳
they do have the havocs there too '10 version bargain
http://www.jensonusa.com/store/product/HB276A01-Easton+Havoc+Dh+750+Handlebar+10.aspx
tho saying that
http://www.sjscycles.co.uk/easton-easton-havoc-dh-riser-bars-318mm-clamp-prod23467/Easton+Havoc+Dh+750+Handlebar+10.aspx