Forum menu
Help me find a old ...
 

[Closed] Help me find a old high-end road bike in minty condition

Posts: 0
Free Member
Posts: 0
Free Member
 

Retro road bikes are lovely, but they don't ride then same as modern plastic/alloy frames. I ended up selling my Graham Weigh Columbus SLX as it was rather flexi. Beautiful though.
[IMG] [/IMG]


 
Posted : 27/06/2013 10:06 am
Posts: 0
Free Member
 

That Coppi that DezB linked to 8) Shimano RSX100?

One thought... having recently rolled my 1997 Lemond out of storage in the first few weeks of riding it I've had to replace all the spokes in the rear wheel. The tyres were replaced a few years ago when a friend borrowed it so they were good but the tubes were shot. Chain and drivetrain were fine and the cables only needed a lube. There was a problem with one of the shifters but a lube and fiddle sorted it... but I know the history of this bike and its been looked after through storage... secondhand bikes may not have had such an easy life and could require more cash thrown at them.


 
Posted : 27/06/2013 10:08 am
Posts: 0
Free Member
 

RSX is what you would expect with Columbus Thron it was a cheaper tubeset


 
Posted : 27/06/2013 10:11 am
Posts: 0
Free Member
 

Hora,

I picked up an old steel Harry Hall a couple of years ago for peanuts.
Columbus SLX tubing with chromed fork and seat/chainstays.
Mavic rims, Duraace hubs, mixture of Duraace & 600 with some later 105 bits.
£80 will spent! 😀


 
Posted : 27/06/2013 10:54 am
 hora
Posts: 0
Free Member
Topic starter
 

Ecky-Thump quit willy-waving 😀


 
Posted : 27/06/2013 10:59 am
Posts: 16209
Free Member
 

The weight thing Is mainly down to lighter modern kit ,unles you go really high end with carbon the steel frame will be a pound or 2 heavier at worst

Yup, my 531c frame and fork weigh about 2lbs more than my carbon Wilier.You could still build it into a light bike if you wanted to.


 
Posted : 27/06/2013 11:08 am
Posts: 0
Free Member
 

Always keeping any eye out on here

[url= http://www.pedalpedlar.co.uk/collections/bikes-for-sale ]www.pedalpedlar.co.uk[/url]


 
Posted : 27/06/2013 1:00 pm
Posts: 0
Free Member
 

[url= http://www.ebay.co.uk/itm/pashley-Vending-Tricycle-/221245321108?pt=UK_Bikes_GL&hash=item33833faf94 ]and enjoy ice cold snacks too[/url]


 
Posted : 27/06/2013 1:20 pm
Posts: 0
Free Member
 

Hora is this any good 60cm c to top or is it a bit big looks nice right price?
http://www.flickr.com/photos/bellabici/sets/72157633994443658/


 
Posted : 27/06/2013 5:31 pm
 hora
Posts: 0
Free Member
Topic starter
 

Im 6ft2. It looks a good resto project


 
Posted : 27/06/2013 6:30 pm
Posts: 12148
Free Member
 

Edric 64 is that yours? The forks look like they've been walloped.

Here's one.........
[img] [/img]


 
Posted : 27/06/2013 7:16 pm
Posts: 0
Free Member
 

cost me £400

[img] [/img]


 
Posted : 27/06/2013 7:52 pm
Posts: 0
Free Member
 

Oldgit I thought that but the listing reckons not


 
Posted : 27/06/2013 10:10 pm
Posts: 0
Free Member
 

Surprised no one has mentioned www.hilarystone.com yet! Personally I think a lot of it is over priced but I'm not up on old roadie history and I'm sure there is some negotiation room there.


 
Posted : 27/06/2013 10:15 pm
Posts: 0
Free Member
Posts: 0
Free Member
 

[img] [/img]

[img] [/img]

Here are ours, a steel 80's 12 vitteses Peugeot, and a ti GT 🙂


 
Posted : 27/06/2013 10:46 pm
Posts: 0
Free Member
Posts: 3854
Full Member
 

I have two older steel bikes. A 653 Dave Yates from 1995 and a another Yates from 1998. The 653 is a little flexy but lovely to ride (hand built wheels Record 10spd groupset). The 853 is a fair bit stiffer, much nearer to the ride of my Carbon bikes.

Some cool retro bikes out there. I love mine and they are staying with me!


 
Posted : 28/06/2013 12:12 am
Posts: 0
Free Member
 

Far from top end but could be a cheap way to test the roady waters for somebody (possibly too small for the OP).

[url= http://www.ebay.co.uk/itm/Peugeot-Road-Racing-Bike-553-Renolds-Tubing-Richard-Virenque-/181164769410?pt=UK_Bikes_GL&hash=item2a2e430082 ]Peugeot Virenque[/url]

15 years ago (when I was a lad etc) I went out with the local roadies/triathletes on an ancient borrowed race bike. It was a 1970's thing with light wheels and kit but it looked like a POS with a red Hammerited frame and downtube shifter etc. I managed to stay with the fast group for all the long climbs but on the flats I was woefully undergeared and had to wait for the next climb to catch up. At the end of the ride it was commented that I needed a "decent bike". I bought my 853 Lemond the following week and stayed with the group on the next ride.

Some of the older stuff available is lovely as museum pieces but as with mountain bikes there is an age beyond which bikes become a bit less usable (IMHO etc).

[b]tinribs[/b] that Ritchey *swoon*


 
Posted : 28/06/2013 9:28 am
 adsh
Posts: 0
Free Member
 

[img] http://www.flickr.com/x/t/0095009/photos/68424083@N07/7723947976/ [/img]


 
Posted : 28/06/2013 9:39 am
Posts: 0
Free Member
 

eviljoe - that Ti GT is sex on wheels!!! I love it. 😀


 
Posted : 28/06/2013 11:06 am
Posts: 0
Free Member
Posts: 0
Free Member
 

A friend rescued a near mint one of these from a council tip recently, lucky sod 🙂

Peugeot UO8

[img] [/img]


 
Posted : 28/06/2013 11:24 am
Posts: 4468
Full Member
 

eviljoe - that Ti GT is sex on wheels!!! I love it.

My Mrs had one of those Ti GT's and a matching MTB too, they were 'skip finds' from a mate of mine who used to work at GT in California 10 years ago or so, chucked because they didn't have frame numbers on them!

Sold for a pittance a few years back as it was always a touch big but god I wish we'd kept them!


 
Posted : 28/06/2013 11:41 am
Posts: 0
Free Member
 

😯 Skip find!!!???

My best skip find was a complete kids apollo bmx for the bairns!... Probably weighs more than the complete GT! 😀


 
Posted : 28/06/2013 12:39 pm
Posts: 0
Free Member
 

If you dont mind stretching your budget(£499) for a new bike take a look at the 'Scout' from Bobbin bikes.
[img] [/img]

Keeppedalling on Hilton St in the Northern quarter have one in(not your size though) if you want to see one in the metal.


 
Posted : 28/06/2013 1:46 pm
Posts: 0
Free Member
 

@sas78 Yes it is rather nice... though you do rather feel the odd seatpost angle on the climbs.

@Blazingsaddles - I didn't buy yours did I? Would have been about 2010 I bough it on here


 
Posted : 28/06/2013 8:53 pm
Posts: 0
Free Member
 

Steel is fine for decades my oldest is a 1947 Hobbs Of Barbican bought from Hillary Stone for about 90 quid


 
Posted : 28/06/2013 9:26 pm
Posts: 4363
Full Member
 

I have a late 70's LeJeune and my wife has a Serth Ifrikan Zini from the early 90s, both nice steel frames with original or period parts, both cost less than £300 to buy.
I just love using down tube shifters, takes me back to being a teenager on my Dave Marsh, bombing around Barnsley...


 
Posted : 28/06/2013 9:39 pm
Posts: 0
Free Member
 

Meh...

I can't get my head around the love for old/retro steel frames. It's nice that people like them, but when I started riding, that's all there was. I had a number, both stock and custom, and they really weren't all that good.

I moved on to aluminium frames and never looked back, then carbon came along and things were even better.

I gave my last one away, a 753 custom job...


 
Posted : 28/06/2013 9:44 pm
Posts: 4468
Full Member
 

eviljoe, No I don't think so. ours was quite small and sold around 2008 I think.


 
Posted : 28/06/2013 9:52 pm
Posts: 4363
Full Member
 

I've had fancy Ali, it and carbon frames, silly lightweight bits and bobs on 15 lb bikes. I don't race, I can't justify having that sort of money tied up in a road bike that I only use when it's sunny and I fancy a spin, or on the turbo in the winter.
Plus I just like old stuff. Guess that's why I also own an early Klein, and have had 70s and 80s cars and vans more than modern stuff.
Each to his own though. If you didn't buy the modern stuff, the future retro geek wouldn't have anything to scour eBay for in 10 years time!x


 
Posted : 28/06/2013 10:05 pm
Posts: 0
Free Member
 

http://www.hilarystone.com/


 
Posted : 28/06/2013 10:11 pm
Posts: 119
Free Member
 

It just takes a little time to find the bargains Somtimes
I've got a nos vitus alloy frame from the early 80s
It's very light and nothing remotely to do with crc lol

Just need to save a little more for some retro campy

So far I've got frame/ fork nos £50
Mavic screw on hubs and campy strada rims used but useable £23
Modolo bars £6


 
Posted : 28/06/2013 10:21 pm
Posts: 0
Free Member
 

I hated my first aluminium frame a Ribble thing that was lifeless .When I get the money together I will go custom steel from this guy

http://www.winterbicycles.com/


 
Posted : 29/06/2013 6:51 am
Posts: 17395
Full Member
 

Just eBay search for

[b]Nervex Pro[/b]

Any bike built with those lugs will be a decent bike - they didn't use those lugs on junk. There's other similar quality lugs, but that will get you started.

Sometimes you'll find a bargain - I got a rather nice Flying Scot that way.

(And don't expect to find something cheap first try)


 
Posted : 29/06/2013 9:23 am
Page 2 / 2