Topic starter
As above rather than bolt on, fitted in a sliding drop out?
Posted : 03/10/2011 5:02 pm
I believe the late great Sheldon Brown used to. There's something on his old website about it.
Posted : 03/10/2011 5:13 pm
You could with a chaintug but it'll probably move. Mine did. Bolt on is the way forwards 😉
Posted : 03/10/2011 5:33 pm
If by sliding dropout you mean one like this:
[img] 
[/img]
Then yes I have in a Kona Unit and a QR hub will be fine..
Posted : 03/10/2011 5:39 pm
It works fine with a qr all mine are .One reason for nuts rather than qr was to stop the qr being opened in close quarter track racing
Posted : 03/10/2011 5:55 pm
I know it's not the same but I run a QR on my singlespeed with track ends.
If you do it, use a shimano skewer as they are stong and clamp securely.
Posted : 03/10/2011 5:59 pm
Topic starter
Its for a regular frame. Looks like I'll need to find some new wheels.
[img] 
[/img]
Or perhaps not 😀It works fine with a qr all mine are .One reason for nuts rather than qr was to stop the qr being opened in close quarter track racing
Posted : 03/10/2011 6:01 pm