Fox 32 Talas, can I...
 

[Closed] Fox 32 Talas, can I swap the existing 27.5 lowers for some 29er lowers

Posts: 0
Free Member
Topic starter
 

This maybe a stupid question but I have some 2015 Fox Talas 150/130 27.5 forks, would it work if I were to swap the lowers for some 29er lowers?

Obviously the travel will decrease but not too fussed about that as they are to replace some 120mm travel ones


 
Posted : 20/03/2016 9:35 pm
Posts: 0
Free Member
Topic starter
 

Anyone had a go at doing this?


 
Posted : 21/03/2016 6:21 pm
Posts: 770
Free Member
 

It might be possible, but will probably be cheaper to sell, and buy the correct forks.


 
Posted : 21/03/2016 6:24 pm
Posts: 0
Free Member
Topic starter
 

Not really viable as the 27.5 lowers although nearly new are a little bit twisted due to an off on their second outing, it is only a tiny bit and you can only see it if you look straight down the length of them, so I presume I wouldn't get much for them, not sure how much I would have to give for some 29er lowers though


 
Posted : 21/03/2016 8:13 pm