FOX 32 CTD servicin...
 

[Closed] FOX 32 CTD servicing/upgrading advice please ............

Posts: 0
Free Member
Topic starter
 

Got a 2014 Scott Spark with fox 32 ctd forks (with remote).

The forks feel terrible and need [at least] a service which looks like it will cost about £100. Have read pretty bad press about these forks though and wondering if a service alone will be enough to get them working well. I see you can get a FIT upgrade but looks like that will cost in the region of £330 all in......

Any thoughts experiences on best way to go - service, upgrade or perhaps a replacement ?

Cheers


 
Posted : 16/03/2016 2:10 pm
Posts: 0
Free Member
Topic starter
 

Any opinions appreciated
Cheers


 
Posted : 16/03/2016 8:17 pm
Posts: 544
Free Member
 

Had a set on my canyon spectral 2014 model i think.

Played around with air pressure extra oil etc just felt bad. I use the bike on a local DH track and the forks just dived and never rebounded.

After a while they went on e-bay and I got a set of nearly new pikes again from e-bay the upgrade cost about + £150

Night and day performance


 
Posted : 16/03/2016 11:07 pm
Posts: 17436
Full Member
 

Same fork (not remote) on 2015 Anthem SX and works very well.

Definitely worth a proper service.


 
Posted : 16/03/2016 11:28 pm
Posts: 1198
Full Member
 

I assume these are 'Evolution series' Fox 32's if they came as OEM spec on your bike.

I've owned a couple of pairs of 'Performance series' spec 32's with the O/B damper. Like all forks you obviously have to keep on top of servicing to keep them feeling their best.

I found them perfectly fine for local woodland single track riding. But if you start doing anything too aggressive with them then their limited performance does really start to show.

I wouldn't bother going down the upgrade route. Nothing wrong with the FIT damper. But if you want better performance I'd take that £330 along with the £100 service and what every you can sell yours for accurately described forks for and buy a completely new fork.


 
Posted : 17/03/2016 8:52 am