Forum menu
Fork grease
 

[Closed] Fork grease

Posts: 6438
Full Member
Topic starter
 
[#1326838]

Got a a families worth of forks to service & wondering what proprietry grease I can get in a decent sized tub, rather than spending oodles on those miniature pots & tubes that cycle shops sell. Thanks


 
Posted : 15/02/2010 12:01 pm
Posts: 14707
Free Member
 

Silkolene RG2 Grease from your local motorcycle shop, not paricularly mega cheap but good stuff


 
Posted : 15/02/2010 12:31 pm
Posts: 6438
Full Member
Topic starter
 

Thanks, is that Silkolene RG2 defo okay for fork seals?


 
Posted : 15/02/2010 1:15 pm
 nuke
Posts: 5801
Full Member
 

I use Rock N Roll Super Slick grease...

http://www.thebikechain.co.uk/store/product/18307/Rock-%27n%27-Roll-Super-Slick-4oz/


 
Posted : 15/02/2010 1:31 pm
 Del
Posts: 8278
Full Member
 

or stendec fork grease...


 
Posted : 15/02/2010 5:02 pm
Posts: 7935
Free Member
 

apart from seals, I didn't think that many forks actually used grease these days.


 
Posted : 15/02/2010 5:43 pm
Posts: 6438
Full Member
Topic starter
 

Scienceofficer - I think you'll find that because I tend to buy things cheap just after they go out of fashion but before they become retro, then most of my forks will need plenty of grease.. 😳


 
Posted : 15/02/2010 8:28 pm
Posts: 0
Free Member
 

Manitou do tubes of M-prep fork grease, my local Go-Outdoors usually stock it.


 
Posted : 15/02/2010 8:30 pm
Posts: 0
Free Member
 

Any old grease will do then IMO Big tub of castrol LM.

If there is no damping oil then all the seals do is keep the dirt out


 
Posted : 15/02/2010 8:31 pm
Posts: 21643
Full Member
 

I love the silkolene RG2 but I wouldn't put it near the insides of any forks. I've got a tube of M-Prep, some Pace stuff and some old Judy butter. All in reasonable sized packets and all lasting well. If anything, the Judy butter is lasting too well as the name might suggest.


 
Posted : 15/02/2010 8:37 pm
Posts: 7935
Free Member
 

LOL dickyboy!


 
Posted : 15/02/2010 10:56 pm
Posts: 0
Free Member
 

Any old grease will do then IMO Big tub of castrol LM.

No LM grease will cause seal swell (assuming by LM your referring to Lithium grease)


 
Posted : 16/02/2010 12:37 am
Posts: 0
Free Member
 

If the forks don't have damping oil in them but are just greased springs then it will only be dust seals so will it matter?


 
Posted : 16/02/2010 1:00 am
Posts: 21643
Full Member
 

There's often a lot of plastic parts in forks like that. Some plastics and some greases don't mix well. I think that's the main reason the suspension specific stuff came about.


 
Posted : 16/02/2010 8:56 am
Posts: 0
Free Member
 

Ah - point taken onzadog


 
Posted : 16/02/2010 9:00 am
Posts: 3
Free Member
 

What about Moly Grease or paste, reason I suggest this is because Moly is what is used in spring powered air rifles, which is a plastic (or leather) seal that slides down a steel tube, same principle but opposite?

Jay


 
Posted : 16/02/2010 11:02 am
Posts: 6438
Full Member
Topic starter
 

All as clear as daylight then? Doesn't really help knowing that at least two of the pairs of forks I am servicing are oil damped in one leg only.... looks like I might have to buy the tiny expensive pots afterall. The Magura Ronins service require equivalent to one pot of judy butter - ie 15ml per leg, so you can see why I would have liked to have found a cheaper option.


 
Posted : 16/02/2010 5:43 pm
Posts: 6438
Full Member
Topic starter
 

Looks like Stendec fork grease will be the best bet £9 for 150ml should do a few forks (as opposed to £5 - £12 for 29ml of Judy Butter!) cheers Del


 
Posted : 16/02/2010 6:27 pm
Posts: 0
Free Member
 

Get some Rock n Roll Super Slick grease, it's designed for forks.


 
Posted : 16/02/2010 6:31 pm
Posts: 3
Free Member