Exercising with a c...
 

[Closed] Exercising with a cast on?

Posts: 41786
Free Member
Topic starter
 

Anyone got any advice on exercise with a broken arm?

Is a turbo a good idea, or will I die (or worse, smell)?


 
Posted : 23/12/2011 4:36 pm
Posts: 0
Free Member
 

turbo will be fine. don't do anything that hurts.


 
Posted : 23/12/2011 4:40 pm
Posts: 0
Free Member
 

I once raced a 4x race in a plaster cast due to broken wrist, you'll be fine ๐Ÿ™‚


 
Posted : 23/12/2011 4:46 pm
Posts: 0
Free Member
 

SWEATY! is all the advice I can offer having recently tried the same, as well as running on a treadmill.


 
Posted : 23/12/2011 4:49 pm
Posts: 0
Free Member
 

Yeah i've run with a cast on no probs apart from the smell which you can do nothing about and can't get away from. No amount of deoderant/fabreze can even touch it.


 
Posted : 23/12/2011 4:53 pm
Posts: 0
Free Member
 

Oh dear, what happened? Imagine the cast will be properly minging after a turbo session.


 
Posted : 23/12/2011 5:07 pm
 Kuco
Posts: 7216
Full Member
 

Turbot trained and ran with a cast on.


 
Posted : 23/12/2011 5:10 pm
Posts: 41786
Free Member
Topic starter
 

Oh dear, what happened?

Epic high speed dismount, wrote off the full face helmet fairly convincingly and had to be cut out of my favourite jersey ๐Ÿ™ Fractured radius due for an opperation to plate it and possibly wire my wrist next wednesday ๐Ÿ˜ฅ

http://singletrackworld.com/forum/topic/broke-my-arm-cheer-me-up


 
Posted : 23/12/2011 5:12 pm
Posts: 0
Free Member
 

Fibreglass cast?

If so, I used to dip it in the bath every now and then and use a hair drier on it. Used to ride my road bike with it on too, but it wears out your bar tape.


 
Posted : 23/12/2011 5:13 pm
Posts: 0
Free Member
 

Oh no, not the favourite jersey! I feel your pain. Get well soon.


 
Posted : 23/12/2011 5:34 pm
Posts: 6985
Free Member
 

when you are getting the cast put on, tell them that you are due to fly soon, they can saw the cast and add velcro so its removeable

you have my sympathy


 
Posted : 23/12/2011 6:18 pm