COUPLE OF 1X10 QUES...
 

[Closed] COUPLE OF 1X10 QUESTIONS, SRAM/SHIMANO

Posts: 0
Free Member
Topic starter
 

JUST GOING ABOUT A 1X10 SETUP ON MY WHYTE 19 TRAIL AND JUST A COUPLE OF QUESTIONS, I'M USING SRAM X7 SHIFTER AND REAR MECH TO TRY IT OUT.

1. I HAVE A 9 SPD 34T SINGLE CHAINRING UP FRONT, CAN I USE IT FOR THE 10 SPD CHAIN??
2. SHIMANO DO A 11-36 CASSETTE AND SRAM DON'T, IS THE CASSETTE STILL THE SAME SPACING OR IS IT BEST TO OPT FOR A SRAM CASSETTE??

THANKS FOR THE ADVICE


 
Posted : 17/02/2011 9:47 pm
Posts: 0
Free Member
 

Don't think there's much difference in the chainrings, i run an SRAM 10 speed chain on 9 speed SLX and it's fine.

The spacing on SRAM and shimano cassette should be the same. Not sure if the shimano cassette needs a shimano chain (shimano chain is directional) though suspect it'd be fine.


 
Posted : 17/02/2011 10:11 pm
Posts: 0
Free Member
 

both sram and shimano do 36t cassettes


 
Posted : 17/02/2011 10:13 pm
Posts: 0
Free Member
Topic starter
 

Thought the chainring would be ok but the cassette could be different, don't know why SRAM don't do a cassette in 11-36 just 12-36. Annoying!
Thanks for the post


 
Posted : 17/02/2011 10:14 pm