Forums
Overview
Bike Forum
Converting Hope Evo...
 

[Closed] Converting Hope Evo rear 12x142 to QR 135 - What do I need?

 
 austinburner
Posts: 0
Free Member
Topic starter
 

Advice would be much appreciated.


 
Posted : 23/09/2014 11:42 am
 mikewsmith
Posts: 17
Free Member
 

A set of 135mm end caps. Check the hope tech help page for the part number


 
Posted : 23/09/2014 11:44 am
 mboy
Posts: 12648
Free Member
 

[img] [/img]

They're £13 from any Hope dealer


 
Posted : 23/09/2014 11:47 am
 austinburner
Posts: 0
Free Member
Topic starter
 

Do they just drop into whats there, like the front hub end caps?


 
Posted : 23/09/2014 12:22 pm
 MTB-Rob
Posts: 0
Free Member
 

they go over the axle, have to take cassette off as well. pull off, press on.


 
Posted : 23/09/2014 1:29 pm
 sandwicheater
Posts: 4593
Full Member
 

Yep, two minute job. Just went 135xQR to 12x142.

Remove old caps, replace with above QR adaptors. Very simple.


 
Posted : 23/09/2014 1:30 pm
 DJC75
Posts: 40
Free Member
 

Austinburner, I'm looking to go the other way, ie converting from QR 135mm to 12mm x 142mm. Do you fancy a straight swap of the end caps? Could either do this by post, or meet up if you're anywhere near Peebles.


 
Posted : 23/09/2014 1:47 pm
 slackman99
Posts: 45
Free Member
 

Failing that drop me a line.I've got some qr135 end caps that you can have for £5 posted (no longer own the hub)


 
Posted : 23/09/2014 4:18 pm
 austinburner
Posts: 0
Free Member
Topic starter
 

Slackman99, sent you a mail.
DJC75, think the hub has no end caps so can't swap I'm afraid. Thanks for the offer.


 
Posted : 26/09/2014 9:22 pm
Forum Jump:
  Previous Topic
Next Topic