Buying a Commencal,...
 

[Closed] Buying a Commencal, just not sure which one?

Posts: 42
Free Member
Topic starter
 

Hi

Really undecided at the moment whether to go for a meta 5.2 or a super 4.2.

Has anybody got a super and will it take a decent peaks ride?

cheers


 
Posted : 08/04/2009 4:26 pm
Posts: 0
Free Member
 

Go for the Meta 5 and get a rear maxle for it!!

Spec it quite light and it's the only bike you'll ever need!!

The Super 4 will easily take a decent peaks ride.....but, the Meta can take be used like a Mini-DH bike should you want to!!


 
Posted : 08/04/2009 4:47 pm
Posts: 42
Free Member
Topic starter
 

Ah

Great about the super4

currently got a 140mm prophet and don't do half the rough stuff the bike wants to do, so dropping the travel and weight sounds like the best plan

cheers for that


 
Posted : 08/04/2009 4:57 pm
Posts: 41786
Free Member
 

selling the prophet? what size?


 
Posted : 08/04/2009 5:09 pm
Posts: 21
Free Member
 

Just letting you know that merlin has got a sale on commencal for easter.


 
Posted : 08/04/2009 5:12 pm
Posts: 42
Free Member
Topic starter
 

Hi Spoon

Its a large, got a guy interested at the moment but will keep you in mind if he doesn't want it

cheers


 
Posted : 08/04/2009 5:29 pm
Posts: 357
Free Member
 

What size 5.5.2 are you after?


 
Posted : 08/04/2009 6:16 pm
Posts: 0
Free Member
 

The Super 4 is quite a slack 4" bike so is fun on the downs too, but is going to be better on the climbs than the Meta. If you are not using the Prophet's travel then the Super 4 is going to suit you down to the ground.


 
Posted : 08/04/2009 7:30 pm
Posts: 777
Free Member
 

like the look of the super 4, wondering if it would take some 130mm forks? (have some rev's 130 - 100 u-turn forks waiting)

anyone?


 
Posted : 08/04/2009 9:59 pm
Posts: 0
Free Member
 

The Commencal site says you are warrantied to run a front fork at 490mm axle to crown


 
Posted : 08/04/2009 10:17 pm
Posts: 777
Free Member
 

hmmm the rev's by my tape measure work out at 520+ so i guess on the button when at 100mmm - just what would happen at 130mm? Really enjoy the clims so drawn to the super 4 and really crap on the down - so need all the help i can!


 
Posted : 08/04/2009 10:32 pm
Posts: 0
Free Member
 

Get the one with the free bearing puller as you will be needing it every 6 months of peaks riding!


 
Posted : 08/04/2009 11:14 pm
Posts: 42
Free Member
Topic starter
 

Bland are you saying it eats bearings or just a comment on peak riding in general?


 
Posted : 09/04/2009 11:11 am
 sv
Posts: 2815
Full Member
 

Speak to Steve @ Real Cycles the best Commie dealer in the UK for the last three years.
Nice bloke and knows what he is talking about, has a ex-demo sale on at the minute too.

Tel: 028 90 814 914


 
Posted : 09/04/2009 11:15 am
Posts: 42
Free Member
Topic starter
 

Would do, but planning to buy from merlin (save £500+)

Think it would be bad form to pick his brains and not buy from him

cheers for the heads up though.


 
Posted : 09/04/2009 11:27 am
 FOG
Posts: 3016
Full Member
 

I have just bought a 4.2 but have only been out on it twice so far and haven't got it set up properly yet. It certainly seems to go up well and down better than expected but it leaves me curiously underwhelmed. I am not sure whether this is the'god have I done the right thing' feeling I get when I spend money or just suspended judgement until I can get a proper thrash.
Anyway I have a week in Swaledale next week so I will definitely know by then!


 
Posted : 09/04/2009 3:18 pm
Posts: 42
Free Member
Topic starter
 

FOG

Send me a mail once you've had a proper thrash, would be interested

cheers


 
Posted : 09/04/2009 4:42 pm
Posts: 0
Free Member
 

Would do, but planning to buy from merlin (save £500+)

Think it would be bad form to pick his brains and not buy from him

cheers for the heads up though.

He's now doing a Price Match in order to compete with other dealers prices{Merlin} and seriously he is an authority on these biks and will give great service - see this link for details[url] http://www.commencalownersclub.com/index.php/topic,3384.0.html [/url]

So you'll get Merlin's price with Real Cycles support - A RIGHT BARGAIN!


 
Posted : 09/04/2009 4:56 pm
Posts: 0
Free Member
 

"the rev's by my tape measure work out at 520+ "

Really?! They're meant to be 508mm @ 130mm

Did you measure to the very bottom of the fork. The arch to crown measurement is supposed to be from the axle centre to the the bottom of where the crown race sits


 
Posted : 09/04/2009 5:03 pm
 FOG
Posts: 3016
Full Member
 

ruminant- certainly will but I won't be back until 19th April {mind you the offer has been on for a while so I can't see it disappearing overnight]


 
Posted : 10/04/2009 11:12 am
Posts: 150
Free Member
 

ruminant - Member
Would do, but planning to buy from merlin (save £500+)

Think it would be bad form to pick his brains and not buy from him

cheers for the heads up though.

Thats the best post I've seen on here for ages, very true & very refreshing to see in this day & age.
[doffs hat]


 
Posted : 10/04/2009 2:46 pm
Posts: 0
Free Member
 

Definately a noble sentiment, but may I point out again that Steve from Realcycles is now doing a Price Match to try and compete with Merlin. Seriously save yourslf money and get first-class service by taking him up on this offer!


 
Posted : 10/04/2009 3:16 pm
Posts: 42
Free Member
Topic starter
 

Thanks for the doffed hat.

But I must have been really bad in a past life as karma has proper shot me in the knackers.

Car broke down yesterday, loud knocking noise, probable timing issue. I'll not know till next tuesday earliest how much it will cost so bike plans shelved till then 🙁

Will def speak to steve though when I get the all clear.

Cheers to everyone for the advice

The bike of choice is a super4.2


 
Posted : 10/04/2009 4:01 pm
Posts: 150
Free Member
 

Ruminant, I don't suppose your in London are you? if you could get the car to me I'm sure I could get one of my guys to look at it & save you a few quid, I'm sure the technology won't be beyond them 😉
Email in profile (in the next ten minutes)
Cheers.


 
Posted : 10/04/2009 4:35 pm
Posts: 0
Free Member
 

Steve is a top bloke. Has been great with my pestering about various replacement bits since I was told by Commencal to bother him rather than them about tube sizes, clamps etc.


 
Posted : 10/04/2009 4:41 pm
 taka
Posts: 0
Free Member
 

er... argentinien pices of crap


 
Posted : 10/04/2009 4:45 pm
Posts: 42
Free Member
Topic starter
 

2unfit thanks for the offer but based in derbyshire, bit far really 🙂

Taka - what you on about??


 
Posted : 10/04/2009 5:21 pm
Posts: 0
Free Member
 

Max fork length mentioned for the 4, but how about the 5. I can't see the info on the Commencal site. I have some Marz Z1 lights to use if I buy a Meta 5 frame. 150mm travel - not sure about axel to crown though.
Can anybody advise. Thanks.


 
Posted : 10/04/2009 5:58 pm
Posts: 621
Free Member
 

I have some Marz Z1 lights to use if I buy a Meta 5 frame. 150mm travel - not sure about axel to crown though.
Can anybody advise. Thanks.

Comes standard with 140mm zocchi forks, can't imagine 10mm is going to make all that much difference. Steve will know. Think he's also the guy that runs [url= http://www.commencalownersclub.com/ ]Commencal Owners Club forums[/url], if not him then someone on there will know for definite.


 
Posted : 10/04/2009 6:12 pm
Posts: 4
Full Member
 

taka - Member
er... argentinien pices of crap

LMAO.


 
Posted : 10/04/2009 6:15 pm
 taka
Posts: 0
Free Member
 

made in argentina and there crap 😆 had two sold one broke the other


 
Posted : 10/04/2009 8:13 pm
Posts: 4
Full Member
 

Getting mixed up with Andorra Taka ??????? - no offence meant but I seem to remember you had a combi hydro which is about a £450 bike,the meta's aren't really in the same league as this.Just a point.

http://en.wikipedia.org/wiki/Andorra


 
Posted : 10/04/2009 8:35 pm
Posts: 0
Free Member
 

If I remember you had a combi disc. They're pretty strong providing you're not doing stuff they're not designed for (i.e. they're not a "hardcore hardtail").


 
Posted : 10/04/2009 8:59 pm
 taka
Posts: 0
Free Member
 

i know im dense alright! im off to go rock in my corner 🙁 i had a combi disc and a maxmax bullshit there a jump bike my arse snapped rear dropouts on a funbox 😯


 
Posted : 10/04/2009 10:44 pm
Posts: 4
Full Member
 

fat arse !!!! 😉


 
Posted : 10/04/2009 10:59 pm
 taka
Posts: 0
Free Member
 

8)


 
Posted : 10/04/2009 11:05 pm