I've recently built this beast up from very cheap ebay purchases. Reckon the total cost has now been around £385-395 and it's turned out to be a damn good ride too 🙂
Anyone like to share the dodgy creations they've managed to scrape together from classified adds/ebay parts, and what it's cost? Dont be shy, I'm in no position to laugh ...
Fair old beast for under 400 notes! Did everything come from ebay?
had the back end of a stab kickin around for a while
[img]
[/img]
front end 30 on ebay
shock swinger 3way 80 ebay
forks drop offs 70 ebay
wheels hope mavic 150 ebay
brakes mono m4 75 pnikbike
post saddle chainring 80 off ebay
bearing kit cranks 50 crc
chain device off a mate free 🙂
grips free with dirt subs
gears tyres pedals bars stem i had kickin around
about 500 i reckon but lots of fun
makes me extra proud havin bust my balls to swap them bearings and riding sooooo sweet at cwmcarn last weekend
in the jungle before i got the m4s and e13
I'd not actually priced this yet, most of it's off of ebay and bikeradar. Frame, £70 (On One Scandal)... Forks, £170 (Revelation 426 dual air) off Bikeradar. X9 shifters and rear mech were £40 on ebay. Easton EC70 bars were £30 on ebay (yeah I know, second hand carbon but I'm not dead yet). Seatpost, Raceface Next SL carbon, £50 off Bikeradar. Stem is a DMR Conrod, it seemed like a good idea at the time, £2 off ebay.
So I was doing pretty well til I got the wheels, XT brakes, SLX chainset and XT cassette and front mech new 😛
Kimbers, nice job on the Stab!
The handlebar was already knocking around in my garage, so i guess that's cheating, but the rest came from ebay by just being patient.
I look through the newly listed 'Buy it Now's' alot and often someone wants to sell something super fast to raise money in a hurry and I snap up a bargain. Frame was £100 and so was the fork. £4 worth of pivot bearings later the frame runs like new, the fork had just been serviced by the previous owner anyway! Got the pair of Sunn Mammoth DH rims from Rutland Cycling's ebay store for about £26pr and mate built them on to cheap deore hubs. The rest came from lucky auctions with no bidders, or newly listed bargain Buy it Now items. 🙂
Now, the sun is shining and the Scott needs a thrashing up Bringewood. See you later...
Those hoodies on the background look interested in your sweet ride Jujuuk 😀
are you very short ianpinder? that seat is awfully low 🙂
Cheap Ti frame from China.
Forks, wheels (now replaced by Hope/Mavic), chainset, mechs, shifters, brakes (now replaced by XTR), handlebar all from STW classifieds.
New stem, new seatpost (now a carbon Superstar one), new grips, new tyres.
Saddle was already kicking around.
Bits I've replaced have been sold on.
Cost? Probably around £900 in total. I still think it's a bargain
Spent about 6 months collecting bits for this, they were all new, but saved money where I could:
Saved on list:
£300 forks from America
£50 Chainring/Bracket from America
£100 pedals ebay
£40 stem - STW classified
£130 XO mech & shifters ebay
£40 seatpost - Merlin offer
£180 brakes - Merlin offer
£? saddle - ebay
Other than my Bianchi road bike which was bought new, all my bikes are heavily made up from forum bargains.
Some of the best bargains:
- Rocky Mountain Element full susser - frame for £60, wheels £100 (Hope Pro2, DT), seatpost, cranks, shifters, bars, stem, brakes all also from the classifieds
- Cross Bike - everything other than the frame and fork is from the classifieds
- Single speed (853 SS specific inbred) - all from classifieds other than saddle, brakes, bars and tyres
- Kona Kilauea - all from classifieds over the years other than frame, seatpost, saddle, stem and brakes
Saved me an absolute fortune - some stuff I always get new (chains, cassettes especially) but the rest is usually just as good if used and I've had very few instances of classifieds parts being overly tired even when the cosmetic condition hasn't been great.
Nice bikes folks. Just shows one person's muck is another person's brass.
I built my handjob using sale & older parts all new though.
'08 Rev 426's for £250
'07 Race Face Evolve XC Crankset £57 - CRC
'08 RF Evolve/Deus XC finishing kit for about £80
'08 LX groupset (without brakes) inc cables for £50
It can be done if you're not a bike tart who must have spangly new things all the time
most of my bikes are built from bits from forum buys or deals 😉
new bartape,tyres and mechs rest used
[IMG]
[/IMG]
new frame (bought cheap on bike to work and also discounted mates rates) and bar tape, guards rest used
[IMG]
[/IMG]
new tyres grips and stem rest used
[IMG]
[/IMG]
new frame,stem,bars,post and bb (but its all pretty cheap)rest used
[IMG]
[/IMG]
all in all quite a nice collection for not too much money and i like tinkering and building anyway 😉
This came in under £200 if you ignore the parts I already had & they were all well used + they were at least 3 years old. I'm going to call it "Thug Bike" as its brutally harsh and has 203mm 6pot brakes!!
[img]
[/img]
eBay purchases
Frame £29
Brakes £49
Bars & Stem £10
Gears & shifters £25
Seatpost £5
Saddle £10
S/H bits I had lying around
Forks
Wheels
Tyres
Pedals (the only flat ones I have)
Grips
Spacers
Chainset
Chain
CRC Flood sale
Cassette £15
Headset £20
Seat clamp £5
BB £15
All cables/outers & ferrules were bits from other sets.
Mr overshoot, are those Z1SL 2003 forks?
Vortexracing - MemberMr overshoot, are those Z1SL 2003 forks?
No they are 2004 Z1 FR SL's but you were close. Bought them S/H in 2004!
best forks they did.
really miss mine
Vortexracing - Memberbest forks they did.
really miss mine
I think I would agree with you there, had some 04 Marathon S Coils but they were a bit flexy and I have some 08 AM 1 SL's which are fine in a sort of clunky way.
I have changed the oil twice but the seals & bushings are still fine, that and the coating is as tough as old boots.















