[Closed] Bigger Big Ring! Shifting or Ratio issues?

most front mechs have a specified 'max teeth' for the big ring and 'max capacity' for the difference between big and small rings - look yours up. I use ribble cycles for my 'stronglight' chainrings and have been happy.

that said, what is the smallest sprocket on your cassette? going from 12T to 11T would have almost the same effect, if this is an option.

may come down to relative cost. chainrings are cheap enough and most mechs should cope with 44T. you will have to move it up the seat tube and readjust the cable.

EDIT - and don't forget to lengthen your chain. see below:

http://singletrackworld.com/forum/topic/wrong-gear-combination-results-in-broken-carbon-frame-

28 -44 would be a big jump and may not shift very well
Or learn to up your cadence

Difference between 40T and 44T isn't really worth the hassle I'd have thought, if you're running out if gears in the 40T it would probably be only 1-2 mph faster with a 44T and you'd be back to square one again, only you'd have spent money on a new ring and poss a new FD and your shifting won't be as good.

Might not be 'on trend' but how about just sticking a triple chainset on?

Stevo210 - Member

Running an XT crankset 40/28. Need to up the teeth count on the front ring as I'm finding I'm running out of gears on the odd bit of tarmac
...
Advice much appreciated.

phone Sir David Brailsford, and tell him to ditch that loser Froome...

I have to say I think you're going to compromise your MTB for the sake of a bit more speed on the road.

I cannot believe you are running out of gears for very long on tarmac, with a mountain bike with a 40x11 top gear. If you are, it must be downhill and you can probably tuck and not lose any speed.

It you're that strong, then a 28 is surely too small so you could up both the gears. Going up to 44 would give you a bit of extra speed - at that speed then a few mph is quite a bit extra power. I'd have thought how long can you hold that 40 with the bottom cassette gear (36?) is more relevant to overall speed on a mountain bike.

I have to say I think you're going to compromise your MTB for the sake of a bit more speed on the road.

40x11 top gear. If you are, it must be downhill and you can probably tuck and not lose any speed.

Looks like I'll just have to coast more and stop being in such a rush!

if you wanna go fast on the road why are you using an mtb?

learn to spin.

if you wanna go fast on the road why are you using an mtb?

Spinning...somebody is about to post the video of the Chinese group on rollers no doubt!!

I take it this is 26" wheels? Even so, that's pretty fast to be spinning out in that gear to be honest and I sort of struggle to believe the whole 'spinning out' thing.

The triple is now a 42 max. I honest think this is too big as the bigger the ring just gets bashed on rocks.

I use a 46x12 on my commuter and while this is a 700c wheel the narrow tyres mean it isn't that much quicker and I rarely spin out even when shadowing buses at 30+mph.

Alot of my roadie pals just use a 39 ring for training and they hit 30+mph on it without worry of 'spinning out'.

Anyway, there are options for bigger chainrings but you may well have to change the inner ring (you may as well if it's not used).

I use a 46x12 on my commuter and while this is a 700c wheel the narrow tyres mean it isn't that much quicker and I rarely spin out even when shadowing buses at 30+mph.