...if I don't get the BB faced?
The frame is a DMR Trailstar and it will be having a Hope BB fitted and Blackspire stinger chain device. All the parts should now have arrived and I want to start building this weekend. Obviously taking the frame to be faced will mean I can't.
It'll be fine.
It will b e fine, ive never bothered with any of the bikes Ive put together and my BB's last for ages
get it faced when the BB needs replacing - new bike means new bike time!
It'll be fine. Or at least if it was so badly made as to cause a problem, it's pretty obvious (and unusual).
space/time will be OK, unless your pedals meet their future selves & have a baby
bearings too, unless there's an obvious discrepancy as you screw in the cups
If it's an external bearing b.b get it faced, it should only be £10 -£20 if you take the frame stripped to the shop. Otherwise don't worry too much.
will the fabric of space and time itself collapse inwards
No, but your bb bearings might. As above, you might well get away with it, but for the sake of 10 minutes in the bike shop is it really worth it?
Don't forget my bike blessing service. You might well get away without it but for the sake of 5 mins (I can do it over the internet too!), is it really worth it? 😉