Any good 130mm 29er...
 

Any good 130mm 29er Fork Deals?

Posts: 13554
Free Member
Topic starter
 

Not getting on with the MRP fork that came with my bike so looking to change it. Pikes are always reliable. Anything else I should be looking for and anybody aware of any bargains out there?


 
Posted : 18/05/2024 4:00 pm
Posts: 6785
Full Member
 

https://www.merlincycles.com/fox-34-float-rhythm-grip-boost-mtb-forks-2021-29-280570.html

Seems a decent deal?


 
Posted : 18/05/2024 4:21 pm
funkmasterp, ampthill, kelvin and 3 people reacted
Posts: 5351
Free Member
 

⬆️ Maximum 2.4 tyre may be an issue?


 
Posted : 18/05/2024 5:50 pm
Posts: 21636
Full Member
 

Is it a different chassis to the performance elite? I only ask as I'm looking at mine with a Minion DHF 2.5 WT on a 30mm internal rim and a RRP bolt on fender.


 
Posted : 18/05/2024 6:09 pm
Posts: 2884
Free Member
 

I don’t know if you’re interested but I’ve got a set of Cane Creek Helm mk2 air I’m not using. They’re currently sat to 160mm but can easily be reduced using spacers internally. It’s a very easy 15 minute job that’s certainly no harder than a lower leg service.

Theyve had very little use with the steerer cut to about 190mm (from memory).

Theyre a superb set of forks, that are in my opinion superior to any Pike.

The only reason I’m selling is because my Madonna takes a 170mm fork & I was itching to try the z1 coil with fast damper.


 
Posted : 19/05/2024 11:27 pm
Posts: 31010
Full Member
 

Is it a different chassis to the performance elite?

Yes. Well, the same as older performance elite, not the same as recent ones.

I’ve run a 2.5” in my Rhythm, again with bolt on (Synchros) mudguard. Wouldn’t bother trying a 2.6 or a mudguard that goes under the arch.


 
Posted : 20/05/2024 8:57 am
Posts: 21636
Full Member
 

My PE mentioned above is 2017/18. Pretty sure arch clearance hasn't gone backwards in that time.


 
Posted : 20/05/2024 9:11 am
Posts: 7362
Full Member
 

You mean Chain Reaction aren't the go-to for Fork bargains anymore?? 😆


 
Posted : 20/05/2024 10:22 am