Forum menu
661 Evo Knee Pads-w...
 

[Closed] 661 Evo Knee Pads-which one on which leg?

Posts: 0
Free Member
Topic starter
 
[#3178812]

Okay my Kyle Straits are easy, they are marked left and right. The d30 Evo pads aint and I am blowed if I can see a difference in the 'cut' of the pad only the little orange d30 tab but do you wear it on the inside of the leg or the outside. Even tryed google pics to see and they have conflicting images-so which way is the right way please?


 
Posted : 24/09/2011 6:54 pm
 rs
Posts: 28
Free Member
 

I would say tab outside.


 
Posted : 24/09/2011 6:55 pm
Posts: 27
Free Member
 

velcro tabs on the outside shirley


 
Posted : 24/09/2011 7:03 pm
Posts: 34
Free Member
 

Just checked my Evo pads and I've always taken it to be that it's orange tab on the inside. My pads have a few white labels at the top on the inside and one of them (on mine) says Adult LGL on one pad and Adult LGR on the other. I'm guessing it's Adult Large Left and Adult Large Right... so if you set them up like that, you get the above position of the orange tabs.

Hope that's of help! ๐Ÿ˜•


 
Posted : 24/09/2011 7:04 pm
Posts: 417
Free Member
 

Where are the marks for L n R on the Kyle straights ?


 
Posted : 24/09/2011 7:08 pm
Posts: 0
Free Member
 

if they're so similar, what does it matter?


 
Posted : 24/09/2011 7:17 pm
Posts: 9238
Free Member
 

The evos say L and R on the tags. Not that it matters but if you're bothered it's there


 
Posted : 24/09/2011 8:05 pm
Posts: 0
Free Member
Topic starter
 

I have checked, double checked and triple checked, there are no size indicator labels on the d30 evo pads that I have (from LBS from distributors) only the little orange d30 tab at the bottom of the knee area to one side.
I thought on the Straits the velcro strap comes round the leg from the outside towards the inner leg when fitted to the correct knee (they have the relevant leg markings on labels).
Its really going to trouble me if I dont get a definitive answer ๐Ÿ˜›


 
Posted : 24/09/2011 8:29 pm
 rj
Posts: 0
Free Member
 

It doesn't make any difference.


 
Posted : 24/09/2011 8:59 pm
Posts: 0
Free Member
 

rj+1


 
Posted : 24/09/2011 9:26 pm
Posts: 0
Free Member
 

work it out then tipex it on...


 
Posted : 24/09/2011 10:38 pm
Posts: 1377
Full Member
 

Shredder; L+R on my Kyle Straits is on the label last digit of the "part no." from memory. They're in the van for tomorrow, otherwise I'd look and tell you for certain.


 
Posted : 24/09/2011 10:59 pm
Posts: 0
Free Member
 

On my Straits I always put the little blue label and velcro tab on the outside. A little common-sense needs to be employed here... If the velcro is on the inside then it got get knocked by your other leg when off the bike but with it on the outside there's no problem with it.

I thought it was obvious adn there was no need for labels, how wrong I was ๐Ÿ™„


 
Posted : 24/09/2011 11:10 pm