1x9 Setup - What le...
 

[Closed] 1x9 Setup - What lever and mech?

Posts: 4910
Full Member
Topic starter
 

Been using X0 since about 2007 and have been chuffed with the performance - but this was back when Shimano (IMHO) weren't up to scratch.

So then SRAM still the best shifting or should I consider others?

Also to those running 1 x 9 do you use a short cage rear mech?

Cheers ๐Ÿ˜€


 
Posted : 25/02/2010 2:53 pm
Posts: 3722
Free Member
 

I use a short cage X9 rear mech. It looks very small but works well. As for shifters, SRAM are easier to set up with their 1:1 ratio but Shimano have a lighter, nicer feel to the lever. So takes your choices.


 
Posted : 25/02/2010 3:36 pm
Posts: 0
Free Member
 

X9 shifter and short cage X9 mech. Both feel good but I find the short cage makes it harder to get the rear wheel off than the long cage that used to be on there.


 
Posted : 25/02/2010 3:57 pm
Posts: 0
Free Member
 

If you go for a shimano, try an SLX shaddow, I say the SLX as it has a stronger spring in it, and the shaddow design means the mech itself doent hit the chainstay.. Not sure if they do a short, I run a medium on a triple, but the last bike was 1x9.


 
Posted : 25/02/2010 4:04 pm
 Keva
Posts: 3275
Free Member
 

I use LX (might be SLX)shifter and XT rapid-rise med cage rear mech.


 
Posted : 25/02/2010 4:05 pm
Posts: 16
Free Member
 

saint mech, much tougher


 
Posted : 25/02/2010 4:45 pm
Posts: 0
Free Member
 

X9 shifters and medium-cage mech. Plenty tight and more versatile if I change my mind later.


 
Posted : 25/02/2010 5:34 pm