190x57mm or 197x57m...
 

[Closed] 190x57mm or 197x57mm Coil Shock - what will they fit???

Posts: 48
Free Member
Topic starter
 

Randomly I've found myself with a 197x57mm coil shock and some offset bushings that can make it 190x57mm.

Looking for a few suggestions for frames it could go in as a wee project - anyone want to make a suggestion?


 
Posted : 22/10/2018 8:30 pm
Posts: 3334
Full Member
 

Pretty sure that’s the same as my old nuke proof mega, circa 2011 and in all it’s 26” wheeled beauty


 
Posted : 22/10/2018 8:35 pm
Posts: 40432
Free Member
 

Plenty of frames take a 200x57.

You're thinking 29er I assume?


 
Posted : 22/10/2018 8:57 pm
Posts: 48
Free Member
Topic starter
 

Aye @chakaping 29er all the way....


 
Posted : 22/10/2018 9:09 pm
Posts: 40432
Free Member
 

What's the budget?

New RocketMax, Stage 6, Starling Murmur... or something a bit cheaper/secondhand?


 
Posted : 22/10/2018 10:05 pm
Posts: 0
Free Member
 

A 2017 Smuggler frame. I did have a 200x57 air shock on mine with offset bushings it’s an XL, now run it with a 190x50 CCDB IL coil shock if had a 190X57 coil would be interested to try it.


 
Posted : 22/10/2018 10:24 pm
Posts: 40432
Free Member
 

Did you use an angleset to slacken the bike back out again after fitting the longer shock?

I considered it but decided I'd rather go more slack and am running my Smuggler at about -2 degrees with a 190x50 DBair (140mm fork). It's great.


 
Posted : 22/10/2018 10:31 pm
Posts: 0
Free Member
 

I think the bike had a -1 degree angle adjust although  I didn’t test the bike that much. It Had 140mm forks up front. Am  now back to standard headset & coil with 140mm forks


 
Posted : 22/10/2018 10:46 pm