Viewing 22 posts - 1 through 22 (of 22 total)
  • Where can I get 165mm cranks that aren't more expensive than my frame?
  • lister
    Full Member

    I’ve got a XS Fire Mountain that I’m doing up for my son. I need some 165mm cranks for it, but they seem very expensive to me.
    I’m after spare taper or external, 1, 2 or 3 rings in an easily replacable bolt spacing.
    Is there anything out there for less than £50? I can’t find much…

    Thanks for any help!

    chakaping
    Free Member

    Secondhand Zee?

    Paul@RTW
    Free Member

    I just got some square taper 155 mm for my SiL. £50 ish I think from SJS cycles. They’ve got various size options including, I would imagine, 165 mm. Nothing fancy and they’re pretty weighty but they tick all the boxes.

    captaindanger
    Full Member

    aas above sjs have a few options

    lister
    Full Member

    Thanks folks. Both options look good.
    Those SPA ones are probably a bit lighter than the Thorn ones would you think?

    ahwiles
    Free Member

    if you’re going square taper, you can go shorter than 165…

    (inside-leg divided by 5, as a rough guide. My 5foot wife uses 140’s)

    prawny
    Full Member

    Thicker pedals?

    nre
    Free Member

    Alivio T4060 from CRC, external cups/hollow BB axle, not too heavy if converting to single ring… £40 and sell the rings on ebay. Just be warned – it’s not a looker!

    downshift
    Full Member

    https://www.amazon.co.uk/Kettenradgarnitur-SR-Suntour-T20242-Zähne-schwarz/dp/B0029MP3AO/ref=sr_1_fkmr0_1

    Not sure if 152mm is too short? Cranks are fine, chain rings are heavy, ideal for a 1x conversion.

    ahwiles
    Free Member

    Thicker pedals

    Pedal thickness doesn’t affect the ‘throw’ of the cranks.

    shifter
    Free Member

    XT double in 165 without BB are £77 at CRC. JAN17 for another 10 off probably.
    More than 50 but bloody cheap.

    asbrooks
    Full Member

    @downshift – I’m not sure if those rings are removable. I think the rings are rivet on. Also may have an odd BCD

    poah
    Free Member

    what length are your son’s legs? you might find 165 could be too long.

    Crank Length Calculation

    nre
    Free Member

    I have 2 sets of those suntours on kids bikes, rings are removable.

    asbrooks
    Full Member

    @nre – What’s the BCD? Is it 104?

    nre
    Free Member

    Yep std 104, have superstar 30t Nw rings on our girls bikes (there’s a previous thread or 2 on them)…

    asbrooks
    Full Member

    @nre – thanks for the info. I’ve just ordered a set for my daughters bike 😀

    downshift
    Full Member

    downshift
    Full Member

    Work just fine…

    poah
    Free Member

    You’ll need a chain for it to work TBH

    mamadirt
    Free Member

    Just bought a set of these for my fat bike. 162mm long, square taper, 4 bolt – lighter than the Suntour cranks they replaced – fitted a Renthal narrow-wide chainring and sold the bashguard on for a tenner 🙂

Viewing 22 posts - 1 through 22 (of 22 total)

The topic ‘Where can I get 165mm cranks that aren't more expensive than my frame?’ is closed to new replies.