Viewing 39 posts - 1 through 39 (of 39 total)
  • Well, I don't have to carry that around any more (extreme weight weenie content)
  • Kryton57
    Full Member

    Phew! I just destickered 2 wheels:

    [url=https://flic.kr/p/wgECPg]image[/url]

    😀

    chrishc777
    Free Member

    rotating mass as well… if you count the fact you’re accelerating it twice that’s actually 18 grams!

    goodgrief
    Free Member

    I’ve lost the valve cap from my shock, less unsprung weight.

    Kryton57
    Full Member

    Oooh! Good call…

    downshep
    Full Member

    Will the sticker adhesive still stuck on the rim attract more than 9g of dirt?

    slowoldgit
    Free Member

    Is it now all stuck to the balance?

    dirtyrider
    Free Member

    Stop now, this is a very slippery slope

    goodgrief
    Free Member

    Are they Hope stickers? They look awful!

    swanny853
    Full Member

    I’ve lost the valve cap from my shock, less unsprung weight.

    Which side of the shock is it? It’s only unsprung if it’s on the wheel end of the shock. These things matter at this level!

    chrishc777
    Free Member

    Yes, stop, I’m off to desticker my shock now

    10
    Full Member

    The rebound adjuster fell off my rebas over the weekend. I was instantly faster.

    belugabob
    Free Member

    Stop now, this is a very slippery slope

    Not if you remove the oil – that has to weigh something.

    goodgrief
    Free Member

    Which side of the shock is it? It’s only unsprung if it’s on the wheel end of the shock. These things matter at this level!

    By the linkage, decreases response time by half a mili-second.

    bedmaker
    Full Member

    You’ll live to regret that as you bounce to a halt through a rock garden. The flywheel effect from that mass you’ve just removed would have carried you through.

    amedias
    Free Member

    Find another 10 parts with excessive stickerage and you could save yourself nearly 100g!

    Better get shaving the nibbles on the tyres too, and drilling out your chainrings/brake levers/gear shifters as well, every little helps! 😉

    However, it’s only acceptable if you use the ‘saved’ weight to carry an extra choccy bar

    bikebouy
    Free Member

    Replace valve caps with one wrap of electrical tape.

    😉

    #prostips

    CaptainFlashheart
    Free Member

    Better get shaving the nibbles on the tyres too, and drilling out your chainrings/brake levers/gear shifters as well, every little helps!

    Handlebars and seatpost, too.

    Oh, and be sure to take a dump before EVERY ride.

    matt_outandabout
    Full Member

    Shave.
    Everywhere.

    Kryton57
    Full Member

    Replace valve caps with one wrap of electrical tape.

    Or none at all. Done

    Shave

    . I left the wookie pants for the look, maybe a few g’s to be saved then.

    Oh, and be sure to take a dump before EVERY ride.

    there one complex maths involving the weight of a cheeky cigar vs stopping and reading stw for 20 mins in a portaloo during a 24hr.

    monkeyfudger
    Free Member

    Oh, and be sure to take a dump before EVERY ride.

    Surely this is already mandatory! Never been able to ride without taking a dump first.

    kerley
    Free Member

    All stickers come off my bike as I don’t like them (saving weight is a bonus)

    Cut 4cm of the bottom of seatpost last week and saved 40 grams. A good value weight reduction.

    njee20
    Free Member

    You need a lighter sestpost then 😉

    BigDummy
    Free Member

    Cut 4cm of the bottom of seatpost last week and saved 40 grams. A good value weight reduction.

    I did this too, but it doesn’t go up and down any more. 🙁

    Kryton57
    Full Member

    Once I’ve worn out the chainset completely this winter the bike shall be reborn with that there new XT 1 x 11 which should get me below 25lb.

    Whoop.

    adsh
    Free Member

    If you can wear a chainset out over winter you’ll be wanting new linkages first!

    Wish I was able to join in the fun at Bontrager…….

    trail_rat
    Free Member

    Extreme weight weenie reaaaly ? and your bikes still 25 lbs.

    #doingitwrong

    Mister-P
    Free Member

    Cut 4cm of the bottom of seatpost last week and saved 40 grams

    Cut the top 4cm off and save the weight of the saddle too.

    Mister-P
    Free Member

    XT

    You appear to be missing an R. Or have you removed that to save weight?

    Kryton57
    Full Member

    Mister P – Member
    XT
    You appear to be missing an R. Or have you removed that to save weight?

    I’ve 2 kids and a mortgage, plus my friendly trade contact decided to pursue a new career in twanging a guitar.

    Perhaps if you knew someone…? 8)

    Kryton57
    Full Member

    trail_rat – Member
    Extreme weight weenie reaaaly ? and your bikes still 25 lbs.

    #doingitwrong

    I didn’t claim that, its an assumption on your part.

    kerley
    Free Member

    Extreme weight weenie reaaaly ? and your bikes still 25 lbs.

    25lbs – how do you live with your self.

    My bike is 18lbs without the use of anything expensive or fragile.

    Kryton57
    Full Member

    Let me guess, single speed? And how much do you weigh? 😐

    dirtyrider
    Free Member

    I’ve 2 kids and a mortgage, plus my friendly trade contact decided to pursue a new career in twanging a guitar.

    I’ve got 4 kids and 2 mortgages, and never had a trade contact and I’ve got electric R’s 😉

    Kryton57
    Full Member

    Its funny dirtyrider, that I was mulling over the “cost of bikes” the other day. Some people just get on with the expense buying up XTR and powermeters, others agonise as to whether to try to re-use some Stans rim tape rather than buy some more…

    dirtyrider
    Free Member

    theres room for both things, the trick is being savvy

    mrblobby
    Free Member

    I could have one or two very fancy bikes for the amount I spend across numerous bikes. Just saying.

    Its funny dirtyrider, that I was mulling over the “cost of bikes” the other day. Some people just get on with the expense buying up XTR and powermeters, others agonise as to whether to try to re-use some Stans rim tape rather than buy some more…

    I rather uncharacteristically went and blew a sizeable wad on a lovely front wheel the other day. There was surprisingly little agonising. First ride and any thoughts of how much it cost were immediately dispelled by how much better it was than what it replaced. I’m sure there’s a point I’m trying to make here 🙂

    paulosoxo
    Free Member

    I’ve got electric R’s

    How does it compare to a normal arse?

    Mister-P
    Free Member

    My trade contact is rubbish. He doesn’t even own a mountain bike.

    dirtyrider
    Free Member

    just destickered a front Cyclops ENVE 65 – 14g

Viewing 39 posts - 1 through 39 (of 39 total)

The topic ‘Well, I don't have to carry that around any more (extreme weight weenie content)’ is closed to new replies.