Overview Chat Bike Members News Women
Viewing 5 posts - 1 through 5 (of 5 total)
  • Turner flux (DW link) front mech Q
  • turneround
    Full Member

    moving over to Shimano from Sram, can anyone tell me what XTR front mech i need for the frame

    cheers

    Posted 8 years ago
    rone
    Full Member

    From the FAQ

    A: All dw-link Turner’s use a 34.9mm, Top-pull, Bottom-swing, Traditional Clamp.
    Top-swing will NOT work. All Dual-Pull derailleurs must be modified, due to the bottom-pull arm as it will contact the chainstay yoke under full compression. Go to our tech page for information on how to modify Dual-Pull derailleurs.

    No modification is needed for the following derailleur(s):
    SRAM X9, Top-pull Only, # 00.7615.014.000
    SHIMANO XT 2x band-type FD-M786 Top Pull
    SHIMANO XT 3x band-type FD-M781 Top Pull

    Posted 8 years ago
    sam_underhill
    Full Member

    I took the saw to an xtr dual pull for my old flux. It feels a bit wrong, but once it is installed you will never know.

    Posted 8 years ago
    AD
    Full Member

    I consoled myself with the thought it was even lighter… 🙂

    I also read the instructions several times before taking the saw to the mech!

    Posted 8 years ago
    turneround
    Full Member

    Cheers, will mod one

    Posted 8 years ago
Viewing 5 posts - 1 through 5 (of 5 total)

The topic ‘Turner flux (DW link) front mech Q’ is closed to new replies.

Overview Chat Bike Members News Women