Overview Chat Bike Members News Women
Viewing 6 posts - 1 through 6 (of 6 total)
  • That tiny 1.5mm hex in the top of RS forks…
  • matt_outandabout
    Full Member

    Mine has stripped out. How to remove?

    The fork (2011 RS Revelation RLT 20mm) also seems to be sucking down through travel. Full seal kit? Pay for Loco to sort? Easier fix?

    Posted 7 years ago
    SirHC
    Full Member

    Tried a slightly larger imperial hex key?

    Posted 7 years ago
    benman
    Free Member

    I bought a seal kit off ebay for about £14, and changed all the seals on the air side to solve the fork sucking down. 30 min job, full service pdf is on the SRAM site.

    Posted 7 years ago
    teamslug
    Free Member

    Stretch an elastic band over the end of the hex key and try that. Top tip I picked up somewhere along the way.

    Posted 7 years ago
    dryroasted
    Free Member

    i found that using an imperial hex key of similar size worked , i cant remember the size though sorry.

    Posted 7 years ago
    mark90
    Free Member

    1/16″ is just under 1.6mm so might work, or whatever size torx bit you can jam in there.

    Posted 7 years ago
Viewing 6 posts - 1 through 6 (of 6 total)

The topic ‘That tiny 1.5mm hex in the top of RS forks…’ is closed to new replies.

Overview Chat Bike Members News Women