i've found the source of my clicking and the culprit is my right pedal.
i've removed the hex screw from the pedal, but can't get to the bolt inside in order to remove the axle.
any help?
cheers.
Bike Forum
[closed]
service guide to Wellgo Mag 1's....
-
Posted 1 year ago #
-
It's just an 8mm socket IIRC, the bearing can be knocked out from the other side.
Posted 1 year ago # -
yup, i can see the 8mm nut but i can't get to it with my socket set.
is there something i'm missing?
edit: oh, and thanks!
Posted 1 year ago # -
You might need a narrower socket, mine tapers towards the end is yours flat/straight?
No probs.
Posted 1 year ago # -
nope... the 8mm socket i've got seems too small for the bolt. the 9mm won't fit into the hole where the bolt sits.
bugger.
Posted 1 year ago # -
ok... the nut is 9mm and another housemate has a socket set that fits!
it's open... now what?
Posted 1 year ago # -
Posted 1 year ago #
-
cheers tails,
the wellgo's don't have loose bearings. they've a tiny industry bearing at the outside end and what looks like a nylon bushing on the inside.
i've greased it up good and stuck it back in and tightened it all up. seems to have cured the clicking.
it also means i can re-fit the 'old' BB as that obviously wasn't the cause of the click.
cheers folks!
Posted 1 year ago # -
yeah that should be fine often parts just need coating in grease, pedals being one of those items.
Posted 1 year ago #
Topic Closed
This topic has been closed to new replies.
