Viewing 5 posts - 1 through 5 (of 5 total)
  • reverb help please
  • mickd
    Free Member

    Evening all,
    Went out for a ride today and about halfway round my stealth reverb post has started to sink into the fully down position without pressing the lever.I did a quick search on here and know a common problem is the post sagging a couple of cms which a bleed can fix.Has anyone encountered this before?Before i go and spend £35 on a kit is it worth trying bleeding it or does it sound knackered and taking back to the shop.
    Cheers and many thanks in advance

    nastybuller
    Free Member

    Occasionally it can be fixed with a bleed but if yours is dropping the full travel I’d say keep your £35 and get it warrantied. I had mine serviced for £90 and it worked better than it did when it was new.

    Have u checked the air pressure?

    mickd
    Free Member

    Thanks for reply nastybuller,yes checked air pressure and was registering about 180psi so pumped it up to max 250psi and no difference.

    jonk
    Full Member

    It will be a leaking seal common fault, get it warrantied.

    tillydog
    Free Member

    Was it a hot day?

    Was the button ‘rock hard’ (i.e. no free movement)?

    Does winding the speed adjuster to slow help?

    If no to the above, then it’s probably failed.

Viewing 5 posts - 1 through 5 (of 5 total)

The topic ‘reverb help please’ is closed to new replies.