Viewing 9 posts - 1 through 9 (of 9 total)
  • Marzocchi 55CR forks
  • coolhandluke
    Free Member

    any good?

    for a Santa Cruz Blur LTc, – travel to be reduced to 150mm if I got some…

    jamesca
    Free Member

    Hopefully picking a set up today. They can be set to 150 or 130 as standard but the distributor in nz is cutting a spacer to make them 140.

    hope they okay as I doubt I could send them back.

    Onzadog
    Free Member

    Yes. Mate runs them on a 5 spot. No instructions out there for the internals so can be tricky to drop the travel.

    Onzadog
    Free Member

    Jamesca, I thought the standard options were 170 or 150. At least they were last year when I fettled a pair for a mate.

    jamesca
    Free Member

    So did I, but take a look at wideopen nz who have 170, 150 & 130 options. Seems strange that range is not available in the uk or us.

    Onzadog
    Free Member

    I asked about 130. It’s perfectly doable, it’s just two spacers in there instead of one.c

    scruff
    Free Member

    Anyone done an oil change in these yet? Marz website says 20cc each side which is way less than came out of mine.

    jedi
    Full Member

    i got the 55cr on my bandit. soo good

    scruff
    Free Member

    Very good yes. Dust seal popped out on Saturday so loads of crap got into the oil seals underneath, stripped and rebuilt las tnight but took a wild guess at oil levels. Windawve sent me a link to a dynamic bleed video.

Viewing 9 posts - 1 through 9 (of 9 total)

The topic ‘Marzocchi 55CR forks’ is closed to new replies.