I need to remove some render from the top of a wall,what’s the best method?

Hire a smaller breaker from your local hire centre
or the old method of a lump hammer, bolster and
Plenty of elbow grease

you could have had it put on by the people that did ours a few years ago.

It’s now falling off of it’s own accord! 🙁

I’d recommend a SDS drill with a wide chisel bit!

I’d recommend a SDS drill with a wide chisel bit!

+1

Get a cranked chisel bit, less chance of getting a bit carried away and taking the wall out as well 🙂

Hire something like this with a chisel bit Kango Hammer.

I worked on a building site when I was 16 and spent about a month using one of them to remove render from a tenement block in Glasgow.

I did mine with a big SDS (with roto stop) and a scutching chisel.

be very careful at the top of a wall, you’ll easily loosen the top courses