Hope Pro 3 - 15mm conversion but not 20mm?

[closed]

8 posts & 8 voices | Started 1 year ago by coopersport1 | Latest reply from Ed-O

Tags:

No tags yet.

coopersport1 - Member

? Therefore limiting me to Fox 15mm thru axels

Posted 1 year ago #
rockthreegozy - Member

Yup, kind of silly in my opinion

Posted 1 year ago #
Onzadog - Member

Doesn't Marzocchi also do a 15mm fork?

Posted 1 year ago #
Blazin-saddles - Member

It's because the inside diameter of the bearing is smaller than on the pro 2 so it wouldn't physically fit, the pro 3 after all was designed as a lightweight race hub so no need to be bigger than 15mm really.

Posted 1 year ago #
pinches - Member

DT swiss do a 15mm bolt through too.

Posted 1 year ago #
Northwind - Member

"the pro 3 after all was designed as a lightweight race hub so no need to be bigger than 15mm really."

Unless you want to use maxle Rebas, which there's a pretty good chance you might.

But flip it round, most hubs aren't convertible at all so this is still better than most of the competition, right?

Posted 1 year ago #
b r - Member

Pro II SP's?

Posted 1 year ago #
Ed-O - Member

Hoops Pro 3 SP-AM4 has 20mm bolt through

Here

Posted 1 year ago #

Topic Closed

This topic has been closed to new replies.