Singletrack Mountain Bike Magazine

• Overview
• Bike Forum
• Chat Forum
• For Sale
• Wanted
• Forum Help
• Classified Rules

Bike Forum

1. crash_gav - Member

   OK I'm not that good with appropriate terminology but here goes:

   Hope mini brake lever assembly (not sure what type but square tank in black and newer than the 3-silver one): i have taken everything off as it was not clearing the fluid from tank through to the hose. It seems as if inside the body that it is sticking (I have to push the adjuster screw then the internal barrel back to move anything). I have looked at the site but cannot figure how it works inside the assembly.

   What are my options

   Is it goosed?
   Can I buy a new one if it is?
   Anything else?

   thanks,

   Gav

   Posted 2 years ago #
2. uplink - Member

   Try spraying some GT85 in behind the lever & cycling it a good few times

   Yes - you can buy rebuild kits

   EDIT - it's simply a rod with 2 seals on it - if it's binding inside the reservoir you'll probably need the kit

   Posted 2 years ago #
3. crash_gav - Member

   Thanks Uplink,

   I have it completely stripped but how do you get inside the chamber? The body seems solid.

   Gav

   Posted 2 years ago #
4. uplink - Member

   The threaded rod/adjuster is held in with a small circlip - you need to push it in & then release the circlip, there's a copper/brass washer behind it too
   You should then be able to pull it out

   Other than that - there aren't any other removable parts apart from the baffle in the reservoir

   Posted 2 years ago #
5. crash_gav - Member

   Cheers uplink, your a star.

   Didn't want to force anything without asking first.

   Posted 2 years ago #
6. coatesy - Member

   If it's sticking, I have to ask if you've sprayed any lube like TF2 in the vicinity, it gets in to the seals and swells them(much like using mineral based fluid does)causing the piston to stick. If you have then you'll need new seals(about £1.50 each) and you'll need to remove absolutely every trace of contamination or it'll do the seals again in no time.

   Posted 2 years ago #

RSS feed for this topic

Topic Closed

This topic has been closed to new replies.