Viewing 6 posts - 1 through 6 (of 6 total)
  • fox rp23 vs fox ctd
  • oscillatewildly
    Free Member

    What’s the difference in these shocks now then? Just renamed but basically the same damping etc? Can’t really see much write up about them, but i always liked the rp23…

    monogramman
    Free Member

    Isn’t it now a lever for your terrain?

    C -climb
    T- trail
    D – descent

    Is your new one a ctd?

    theroadwarrior
    Free Member

    No more xv cans with ctd due to a change with the design of the eyelet area I understand. It means the volume spacers are used on the smaller cans. As above ctd shock has 3 compression tune settings.

    oscillatewildly
    Free Member

    [*]Mono – yep new one is ctd, was more wondering if they’ve changed the damper unit etc

    I did wonder what happened to xv and the likes looks like they have mostly put everything all into this new design, must say in climb mode It’s very solid almost like lockout, but not used it properly yet so was just hoping It’s gonna perform just as well as the rp23

    Doug
    Free Member

    It means the volume spacers are used on the smaller cans.

    Which would be great if you can find somewhere that will sell you a spacer.

    legend
    Free Member

    The Fox engineers have worked tirelessly over the last year to replace “1 2 3” with “C T D”. Allegedly only the marketing dept has worked harder 😉

Viewing 6 posts - 1 through 6 (of 6 total)

The topic ‘fox rp23 vs fox ctd’ is closed to new replies.