Viewing 6 posts - 1 through 6 (of 6 total)
  • Fox RP23 BV air pressure?
  • cubemeup
    Free Member

    guys, i had my shox back off mojo last week but never checked the air pressure in it an found out the hard way today up afan!!
    after riding most of it with my pedaks smashing against the floor all the time my stag was over 90%. a nice fella pumped it up for me which helped loads but im 17st do any of you know how much i need to out in??
    cheers
    chris

    Whyte1
    Free Member

    have a look at the mojo web site

    Davesport
    Full Member

    Err….no. No recommendations for pressure as it depends on your weight & the leverage ratio exerted by the shock linkage. Follow the set-up instructions & use the “O” ring to gauge how far the shock is travelling. At 17 stone I would guess you’ll be at or near the upper limit for shock which ISTR is 300 PSI.

    D.

    cubemeup
    Free Member

    ok cheers guys, i got 240psi in there now might try a bit more

    neil853
    Free Member

    I’m 15st 9 and i have 190psi on my blur

    schrickvr6
    Free Member

    As said depends on the frame, but I think 1psi per kg is a good starting point, then work out what suits you.

Viewing 6 posts - 1 through 6 (of 6 total)

The topic ‘Fox RP23 BV air pressure?’ is closed to new replies.