Viewing 6 posts - 1 through 6 (of 6 total)
  • Fox 36's on a 456
  • vinnyeh
    Full Member

    Anybody running Fox 36's or similar on their 456? I'm considering putting a pair on my Ti456. Any experiences, opinions?

    Going to be moving back to the Peaks if that makes any difference

    jamesgarbett
    Free Member

    Hi Vinny I ran Talas 36 on mine for a while but it felt like too much fork for the frame – nose-heavy and no need for more than 140mm

    vinnyeh
    Full Member

    cheers James, thats about what the the_lecht_rocks said as well.

    coolhandluke
    Free Member

    I ran 140's on mt 456 (Summer season) and they were bang on mainly but sometimes felt a bit much. 130mm was boss though.

    160 would be too much,unless you ran a 29" wheel at the back perhaps…. 🙂

    Onzadog
    Free Member

    Get the floats and drop them down to 130 (although the 36s at 130 are still about 10mm taller than the 32s at 130. Then just enjoy the extra stiffness up front. This is my plan for my Pace 305 when I can afford it.

    Saccades
    Free Member

    rc41F = good.

Viewing 6 posts - 1 through 6 (of 6 total)

The topic ‘Fox 36's on a 456’ is closed to new replies.