Forum menu
Dainese Trail Skins...
 

[Closed] Dainese Trail Skins Knee Guard Sizing?

Posts: 0
Free Member
Topic starter
 

Struggling to find any size charts for the Dainese knee pads, only hint I can find is on Wiggle.

Anyone know where I can find a chart? I measure 46cm roughly 10cm above the knee, any pointers which size to go for?


 
Posted : 16/09/2014 12:07 am
Posts: 0
Free Member
 

I used this when I bought mine and they fit fine:-


 
Posted : 16/09/2014 8:13 am
Posts: 28712
Full Member
Posts: 6926
Free Member
 

I'm approx 50cm above the knee and the XL was just a fraction too big so gone for a large (when they come in). I did try them in the LBS tho.


 
Posted : 16/09/2014 8:38 am
Posts: 28712
Full Member
 

How far above the knee mate ? I'm about 52.9cm from approx. 10cm above the knee.. which makes me a bit bigger than you.. which is good as I ordered an XL pair.


 
Posted : 16/09/2014 8:48 am
Posts: 6926
Free Member
 

Just double checked @ 10cm above and I am 50-51cm so an XL should be fine for you. Was just a fraction too big for me and, based on previous experience of pads, they will get a bit bigger with use..


 
Posted : 16/09/2014 8:57 am
Posts: 28712
Full Member
 

Thanks squire.


 
Posted : 16/09/2014 8:58 am
Posts: 0
Free Member
Topic starter
 

I'd be a small according to wiggle with my 46/35cm measurements according to Wiggle: http://www.wiggle.co.uk/dainese-trail-skins-knee-guard/

Seems odd as I'm L in Fox and 2XL in Gform!


 
Posted : 16/09/2014 10:18 am
Posts: 28712
Full Member
 

XL Fits me spot on. Nice too, seem light ... seem well made... Happy with them.


 
Posted : 18/09/2014 1:30 pm